Hamilton Beach HBH850 and HBH950 Programmable Blenders
Current line. 3 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- HBH850
- HBH850-CE
- HBH950
Repairs this series usually needs
- Error numbers on the display
- Unit that stops mid-cycle from overheating
- No jar sensor indicator
- Unit that is extremely noisy from a worn bearing or coupling
The Hamilton Beach HBH850 and HBH950 are larger programmable blenders. The models are the HBH850, HBH850-CE and HBH950. Busy bars and cafes use them.
The display shows error numbers. A unit that stops mid-cycle may have overheated, and a cool-down cycle or unplugging for 15 to 30 minutes is the first step. If there is no jar sensor indicator, the four magnets may be missing or the container may not be seated. An extremely noisy unit usually has a worn cutter bearing or drive coupling.
The larger HBH models carry more motor load, so cooling and bearings matter. A written price comes first, and we tell you plainly when a repair is not worth it. We check the display for missing pixels as well.
About this series
- Larger programmable blenders
- Display with error numbers
- Dedicated 15 amp circuit recommended
Hamilton Beach Commercial blenders codes
Other Hamilton Beach Commercial blenders series
Why does the unit stop mid-cycle?
It may have overheated. Let it cool, or unplug it for 15 to 30 minutes, and call us if it keeps stopping. Tell us how long it ran first.
Why is there no jar sensor light?
The container may not be seated, or the magnets may be missing. We check both and tell you what we find. Tell us what you notice when you call.
How long should I let it cool?
Use the cool-down cycle, or unplug the unit for 15 to 30 minutes. If it stops again quickly, call us. Repeated stops point to cooling or bearings, and we look at both.
Book repair for your Hamilton Beach HBH850 and HBH950 Programmable Blenders
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.