True TFP and TFT Food Prep Tables
Current line. 17 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- TFP-32-12M-D-2-HC
- TFP-32-12M-HC
- TFP-48-18M-D-2-HC
- TFP-48-18M-D-4-HC
- TFP-48-18M-FGLID-HC
- TFP-48-18M-HC
- TFP-64-24M-D-2-HC
- TFP-64-24M-D-4-HC
- TFP-64-24M-FGLID-HC
- TFP-64-24M-HC
- TFP-72-30M-D-2-HC
- TFP-72-30M-D-4-HC
- TFP-72-30M-D-6-HC
- TFP-72-30M-FGLID-HC
- TFP-72-30M-HC
- TFT-32-HC
- TFT-32D-2-HC
Repairs this series usually needs
- Warm pans along the rail
- Dirty condenser from a busy line
- Probe codes on the display
- Lid and gasket wear
- Door alarm from a worn switch
The TFP is True’s food-prep table with a pan rail, and the TFT is the flat-top version with a work surface and no raised rail. Numbers such as TFP-32-12M-HC and TFP-48-18M-D-2-HC show the width and pan count. Seventeen numbers are in the group.
A food-prep table is a workhorse. Staff lean on it, load pans in and out, and spill into it. That means condenser dust, drain blockages and worn gaskets are the first things we look for. We also check the lid hinges, because a lid that sags does not seal and lets pans warm.
The control is next, with the probes and the defrost. We confirm the plate number first so we have gaskets and probes in hand. We also check that the rail cover seats squarely, because a cover that rocks leaks cold air into the room.
About this series
- TFP food-prep refrigerators
- TFT flat-top refrigerators
- Electronic control
- Model numbers such as TFP-32-12M-HC
Other True prep tables series
TPP-AT-119-HCTPP-AT-119D-2-HCTPP-AT-119D-4-HCTPP-AT-119D-6-HCTPP-AT-119D-8-HCTPP-AT-44-HCTPP-AT-44D-2-HCTPP-AT-60-HC+8 more→True TSSU Sandwich and Salad Prep TablesCurrent lineTSSU-27-08-HCTSSU-27-08D-2-HCTSSU-27-12M-B-HCTSSU-27-12M-C-HCTSSU-36-08-HCTSSU-36-12M-B-HCTSSU-36-15M-B-HCTSSU-48-08-HC+33 more→What is the difference between TFP and TFT?
The TFP has a pan rail for toppings and the TFT has a flat top for work. The cabinet below is similar. Read the plate to confirm.
The drain on my table backs up. Why?
Food bits and grease can clog the drain line. We clear it and check that the pan is level so water goes where it should.
Do you replace worn lids and gaskets?
Yes. We confirm the part for your number, quote it in writing and fit it, and we check the seal when we finish. We also test the lid hinges.
Book repair for your True TFP and TFT Food Prep Tables
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.