Older Stero SCT-44 and SCT-64 Rack Conveyor Dishwashers
Older line. 7 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- SCT-44
- SCT-44-10
- SCT-44-CSA
- SCT-44CS
- SCT-64
- SCT-66S
- SCT-94
Repairs this series usually needs
- Conveyor jam
- Final rinse below 180F
- Tank heat failure
- Scale in tank and nozzles
- Door or switch problems
The SCT-44 is an older Stero single-tank rack conveyor taking a 20 inch rack. The SCT-44 gives a 180F final rinse, the SCT-44-CSA sanitizes with chemicals, and the SCT-44-10 is 10 inches longer. Related models are the SCT-44CS, SCT-64, SCT-66S and SCT-94.
On a conveyor this age, we start with the rack path and drive, then the tank heat, the booster and the final rinse. Scale in the tank and on nozzles is common in water. On the chemical model we check the canister and pump.
These older machines are ones we repair, and we tell you honestly if one is not worth the cost. Parts are confirmed by plate model, the cost is quoted first, and our labor is guaranteed for 30 days.
About this series
- Single-tank rack conveyors with a 20 inch rack
- SCT-44 is 44 inches long with a 180F final rinse
- SCT-44-CSA uses chemical sanitizing
- SCT-44-10 is 10 inches longer
- Models include SCT-64, SCT-66S and SCT-94
Other Stero conveyor dish machines series
Do you repair old SCT conveyors?
Yes. The SCT conveyors are an older line that still runs, and we repair them. The cost is quoted up front, and if the machine is not worth fixing we say so.
What is the CSA version?
It is the chemical sanitizing version of the SCT-44. It needs a chemical canister and pump, which we check first. Wear the gloves the chemical maker calls for, and never bypass the pump.
What usually fails on these?
Scale, worn heating parts, the conveyor drive and door switches are the most common. Each part is tested and we report what we found, so you make the call before anything is replaced.
Book repair for your Older Stero SCT-44 and SCT-64 Rack Conveyor Dishwashers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.