Globe SP Countertop and Bench Planetary Mixers
Current line. 5 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- SP05
- SP08
- SP10
- SP20
- SP25
Repairs this series usually needs
- Mixer that will not start with the bowl guard open
- Motor hum or overload trips on heavy dough
- Gear noise or oil leak
- Timer or switch problems
Globe SP mixers from the SP05 up to the SP25 are the smaller planetary mixers in the line, from 5 to 25 quarts. You find them in bakeries, pizzerias and restaurant kitchens, and the model number is on the data plate. Some sit on a bench, others on a stand.
On these mixers we check the bowl guard or bowl position interlock first, since a no-start is often just that. Then we look at the timer, the switch, the motor and any oil weeping at the gear case. Humid weather ages switches and hardens old grease, so a mixer that sat idle can behave differently from one that works daily.
A small Globe mixer that has been in the same kitchen for years has usually earned a fair look. We confirm parts before we come, give a written price first, and tell you plainly if a new mixer would cost you less than the repair.
About this series
- 5 to 25 quart planetary mixers
- Bench or countertop mounting
- Gear-driven mixing
Which sizes are in this group?
The SP05, SP08, SP10, SP20 and SP25. The number is on the data plate and gives the size class, from 5 quarts up to 25 quarts.
Why will my mixer not start?
The bowl guard or bowl position interlock may not be making. We check it first, then the switch, timer and motor, and we give a written price before any part.
Does an SP mixer need regular service?
Keeping the guard switch clean, the grease topped up and the bowl seated properly goes a long way. If the mixer starts to hum, smell hot or leak oil, that is when a visit helps.
Book repair for your Globe SP Countertop and Bench Planetary Mixers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.