Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Globe · Mixers

Globe SP Floor Planetary Mixers, Manual and Power Bowl Lift

Current line. 11 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • SP30
  • SP30P
  • SP40-1
  • SP40-3
  • SP60-1
  • SP60-3
  • SP62P-1
  • SP62P-3
  • SP62P-41
  • SP62P-43
  • SP80PL-3

Repairs this series usually needs

  1. Bowl guard or position interlock that does not make
  2. Bowl lift that binds
  3. Motor hum or overload trips with heavy dough
  4. Gear noise and oil leaks
  5. Timer or switch failure

The Globe SP floor mixers run from 30 to 80 quarts and come with a manual bowl lift or a power bowl lift. The P in a number marks power lift, and the -1 and -3 endings usually mark single and three-phase supply. The full model number is on the data plate and is worth reading out when you call.

We start with the guard and bowl position interlock, then the lift, the motor and the gear case. Dough work is heavy, and a kitchen’s heat and humidity add wear to every moving part. A lift that binds is often dry or dirty before it is broken.

Many SP floor mixers are older machines with plenty of life left in the gear case, so a repair often makes sense. We give a written price first, and we are honest when a lift or transmission repair would not be worth the money.

About this series

  • 30 to 80 quart floor mixers
  • Manual and power bowl lift versions
  • Single-phase and three-phase numbers
FAQGlobe SP Floor Planetary Mixers, Manual and Power Bowl Lift questions
What does the P in SP30P mean?

It marks a power bowl lift. Models without the P use a manual lift. Check the full model number on the data plate and

Why does my bowl lift bind?

Dry or dirty lift parts, a bent guide or a motor problem. We clean, adjust and replace what is worn, with a written price first.

Are three-phase SP mixers harder to repair?

Not really. The mechanical parts are the same, and we check supply voltage and the motor on both types. The difference is mainly in the electrical checks, which we handle with the right meters.

Book a visit

Book repair for your Globe SP Floor Planetary Mixers, Manual and Power Bowl Lift

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit