Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Nuova Simonelli · Espresso machines

Nuova Simonelli Aurelia II Espresso Machines

Older line. 4 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • Aurelia II S
  • Aurelia II V
  • Aurelia II Digit
  • Aurelia II T3

Repairs this series usually needs

  1. LEVEL ERROR from low boiler water, which halts the pump and heater
  2. DELIVERY ERROR and DOSER ERROR from the doser pulses
  3. OVERCURRENT ERR. From a load on the machine
  4. Boiler over 130 C protection
  5. FINE GRINDING and COARSE GRINDING timing messages

The Aurelia II is an older Nuova Simonelli line, built as the S, V, Digit and T3. The volumetric and Digit versions use a doser to measure each shot, and the control reports problems in capital letters on the display, such as LEVEL ERROR, DELIVERY ERROR and OVERCURRENT ERR.

Many of the messages are about timing and water. A shot that runs long shows FINE GRINDING, and one that runs short shows COARSE GRINDING, and both are grinder settings, not a breakdown. LEVEL ERROR and the 130 C message are about the boiler and need a technician if they return.

The Aurelia II is an older line still in service, and we repair it, and tell you plainly when a repair is not worth it.

About this series

  • Traditional group-head espresso machines
  • Versions are S, V, Digit and T3
  • Volumetric and digit versions dose by volume
  • Messages shown in capital letters, such as LEVEL ERROR and DOSER ERROR
FAQNuova Simonelli Aurelia II Espresso Machines questions
What does LEVEL ERROR mean on my Aurelia II?

The boiler water level was not restored after 90 seconds, so the pump and heater stopped. Check the water supply, then turn the machine off and on, and call us if it returns.

Is FINE GRINDING a machine problem?

Usually not. It means delivery took much longer than the set values. Change the grinding degree and test a shot. If shots stay slow, the screen or pump needs a look.

Can an older Aurelia II be repaired?

Yes. Parts for the common wear items are manageable. We confirm the model first, quote in writing and give a straight answer if the machine is past a sensible repair.

Book a visit

Book repair for your Nuova Simonelli Aurelia II Espresso Machines

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit