Huebsch HCA, HCD, HCG, HCH, HCJ, HCT and HCU Washer-Extractors
Current and older. 39 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- HCA020QN
- HCA030QN
- HCA040QN
- HCA060QN
- HCA080QN
- HCA100QN
- HCD020QN
- HCD030QN
- HCD040QN
- HCG020QN
- HCG030QN
- HCG040QN
- HCG060QN
- HCG080QN
- HCG100QN
- HCH020QN
- HCH030QN
- HCH040QN
- HCH060QN
- HCH080QN
- HCH100QN
- HCJ020QN
- HCJ030QN
- HCJ040QN
- HCJ060QN
- HCJ080QN
- HCJ100QN
- HCT020QN
- HCT030QN
- HCT040QN
- HCT060QN
- HCT080QN
- HCT100QN
- HCU020QN
- HCU030QN
- HCU040QN
- HCU060QN
- HCU080QN
- HCU100QN
Repairs this series usually needs
- Board ID error after a board change
- I/O board that stops communicating
- Drive board problem that stops the drum
- Door lock error at the start
- Voltage setting that does not match
These 39 numbers span seven prefixes, from HCA020QN to HCU100QN. The three digits give the washer capacity in pounds, so HCH060QN is a 60 lb machine. The data plate shows the number, and we start there.
The front-end control checks the input and output board and the drive board against the machine setup. If a board is wrong for the machine, the display says so, which is why we confirm the number before swapping anything. When the drum does not turn, we look at the drive board and motor wiring. When the door will not lock, the lock and latch come first.
We repair them, put the cost on paper before the work, and give you a frank answer if a machine has reached the end of the road.
About this series
- Sizes run from 20 to 100 lb across seven prefixes
- Front-end control, I/O board and drive board
- Numbers like HCA020QN, with capacity in pounds in the middle
- CHM1792C family
Huebsch washers codes
Other Huebsch washers series
HCB040GNFHCD020GD2HCH020GNFHCH030GNFHCH040GNFHCH040GNVHCH060GNFHCH060GNV+20 more→Huebsch HCN Washer-Extractors in 20 to 100 lb SizesCurrent and olderHCN020GC2HCN020GD2HCN020GE2HCN020GN2HCN020GNFHCN020GNVHCN020GX2HCN020GY2+32 more→Huebsch HCU Washer-Extractors, 20 to 80 lbCurrent and olderHCU020GC2HCU020GD2HCU020GE2HCU020GL2HCU020GN2HCU020GNFHCU020GX2HCU020GY2+34 more→Huebsch HWNN Quantum Top-Load WashersCurrent and olderHWNNE2AP113CW01HWNNE2AP113CW04HWNNE2HP113CW01HWNNE2HP113CW04HWNNE2HP115CW01HWNNE2HP116CW01HWNNE2SP113CW01HWNNE2SP115CW01+17 more→Huebsch Quantum Front-Load Washers, HFNL and HFNNCurrent and olderHFNLEFSP111CW01HFNLEFSP111CWNAHFNLERSP111CW01HFNLERSP111CWNAHFNLXFSP111CN01HFNLXFSP111CW01HFNLXRSP111CW01HFNLYFSP111CW01+12 more→How do I find my washer size from the model number?
The three digits after the prefix are the capacity in pounds. HCA020QN is a 20 lb washer and HCA100QN is a 100 lb washer. The data plate carries the full number.
Why does a board ID error appear?
The control found a board that does not match the machine setup. We check which board is fitted and compare it with the model number before replacing or setting anything.
Do you repair the larger 80 and 100 lb machines?
Yes. We service the 20, 30, 40, 60, 80 and 100 lb sizes in this group. The larger machines load the mount and the drive heavily, so we look closely at both on every visit.
Book repair for your Huebsch HCA, HCD, HCG, HCH, HCJ, HCT and HCU Washer-Extractors
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.