Huebsch HWT2 and HWT5 through HWT9 Metered Top-Load Washers
Older line. 35 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- HWT210*A1102
- HWT210*C1102
- HWT210*M1102
- HWT210*N1102
- HWT211*A3000
- HWT211*B3020
- HWT211*C1102
- HWT211*C3000
- HWT211*M3000
- HWT211*M3020
- HWT211*N3020
- HWT220*A1102
- HWT220*C1102
- HWT220*M1102
- HWT220*M3000
- HWT220*M3020
- HWT221*A1102
- HWT221*C1102
- HWT221*M1102
- HWT221*N1102
- HWT221*N1127
- HWT521*A1102
- HWT521*C1102
- HWT621*A1102
- HWT621*C1102
- HWT721*A1102
- HWT721*C1102
- HWT820*N
- HWT821*N1102
- HWT910*N
- HWT911*N1102
- HWT911*N3020
- HWT920*N
- HWT921*N1102
- HWT921*N1127
Repairs this series usually needs
- Drain alarm with water left in the tub
- Fill error from blocked screens
- Coin parts that stop counting correctly
- Alarm after a switch is disturbed
- Motor overload that stops the tub
The HWT2 numbers and the HWT5 to HWT9 numbers make a group of 35, among them HWT211*N1102 and HWT911*A3000 as the maker spells them. These are older Huebsch top-loaders, and the characters after HWT are your first clue to the version.
Where a drain alarm is the complaint, we check the pump, the hose and the standpipe height, because a drain set too high leaves water in the tub. Where a fill error is the complaint, we look at the screens and the valves. If the coin parts stop counting, we test the coin sensor and the wiring before any parts are replaced.
We service older machines, agree the cost with you in writing, and are open about it when a repair makes little sense.
About this series
- Metered and non-metered top-load washers
- Prefixes HWT2, HWT5, HWT6, HWT7, HWT8 and HWT9
- Coin-slide, coin-drop or non-metered operation
- Timer, EDC, MDC or NetMaster controls
Huebsch coin & card laundry codes
Other Huebsch coin & card laundry series
HWLX21*N1102HWNSX1SP301UW09HWT011*B3073HWT020*AHWT020*CHWT020*MHWT020*NHWT021*A1102+26 more→Huebsch Lettered Top-Load Washers, HWTB to HWTZOlder lineHWTB21*M1102HWTB21*N1102HWTF21*M1102HWTF21*N1102HWTR21*N1102HWTT20*NHWTT21*N1102HWTV20*N+13 more→Which prefixes belong in this group?
HWT2 and HWT5 through HWT9. The data plate shows the full number, and we use it to confirm parts before we come. Older numbers can be hard to read, so a photo of the plate helps.
Why does the washer keep water in the tub?
A pump, hose or standpipe problem is the usual cause. We check each and tell you which one it is before we do any work.
Do you repair washers with a coin vault alarm?
Yes. A break-in alarm is set off when the door or coin vault switch is disturbed, so we check those switches and their wiring, clear the alarm and test that the washer works as it should.
Book repair for your Huebsch HWT2 and HWT5 through HWT9 Metered Top-Load Washers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.