True TBR and TDR Back Bar and Direct-Draw Coolers
Current line. 86 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- TBR108-RISZ1-L-B-GGGG-1
- TBR108-RISZ1-L-B-SSSS-1
- TBR108-RISZ1-L-S-GGGG-1
- TBR108-RISZ1-L-S-SSSS-1
- TBR32-RISZ1-L-B-G-1
- TBR32-RISZ1-L-B-S-1
- TBR32-RISZ1-L-S-G-1
- TBR32-RISZ1-L-S-S-1
- TBR36-PTSZ1-L-B-G-G-1
- TBR36-PTSZ1-L-B-S-S-1
- TBR36-PTSZ1-L-S-G-G-1
- TBR36-PTSZ1-L-S-S-S-1
- TBR36-RISZ1-L-B-G-1
- TBR36-RISZ1-L-B-S-1
- TBR36-RISZ1-L-S-G-1
- TBR36-RISZ1-L-S-S-1
- TBR48-RISZ1-L-B-11-1
- TBR48-RISZ1-L-B-GG-1
- TBR48-RISZ1-L-B-SS-1
- TBR48-RISZ1-L-S-11-1
- TBR48-RISZ1-L-S-GG-1
- TBR48-RISZ1-L-S-SS-1
- TBR52-RISZ1-L-B-11-1
- TBR52-RISZ1-L-B-GG-1
- TBR52-RISZ1-L-B-SS-1
- TBR52-RISZ1-L-S-11-1
- TBR52-RISZ1-L-S-GG-1
- TBR52-RISZ1-L-S-SS-1
- TBR60-PTSZ1-L-B-11-11-1
- TBR60-PTSZ1-L-B-GG-GG-1
- TBR60-PTSZ1-L-B-SS-SS-1
- TBR60-PTSZ1-L-S-11-11-1
- TBR60-PTSZ1-L-S-GG-GG-1
- TBR60-PTSZ1-L-S-SS-SS-1
- TBR60-RISZ1-L-B-11-1
- TBR60-RISZ1-L-B-GG-1
- TBR60-RISZ1-L-B-SS-1
- TBR60-RISZ1-L-S-11-1
- TBR60-RISZ1-L-S-GG-1
- TBR60-RISZ1-L-S-SS-1
- TBR72-RISZ1-L-B-111-1
- TBR72-RISZ1-L-B-GGG-1
- TBR72-RISZ1-L-B-SSS-1
- TBR72-RISZ1-L-S-111-1
- TBR72-RISZ1-L-S-GGG-1
- TBR72-RISZ1-L-S-SSS-1
- TBR84-PTSZ1-L-B-GGG-GGG-1
- TBR84-PTSZ1-L-B-SSS-SSS-1
- TBR84-PTSZ1-L-S-GGG-GGG-1
- TBR84-PTSZ1-L-S-SSS-SSS-1
- TBR84-RISZ1-L-B-GGG-1
- TBR84-RISZ1-L-B-SSS-1
- TBR84-RISZ1-L-S-GGG-1
- TBR84-RISZ1-L-S-SSS-1
- TBR92-RISZ1-L-B-GGGG-1
- TBR92-RISZ1-L-B-SSSS-1
- TBR92-RISZ1-L-S-GGGG-1
- TBR92-RISZ1-L-S-SSSS-1
- TDR108-RISZ1-L-B-SSSS-1
- TDR108-RISZ1-L-S-SSSS-1
- TDR32-RISZ1-L-B-S-1
- TDR32-RISZ1-L-S-S-1
- TDR36-PTSZ1-L-B-S-S-1
- TDR36-PTSZ1-L-S-S-S-1
- TDR36-RISZ1-L-B-S-1
- TDR36-RISZ1-L-S-S-1
- TDR48-RISZ1-L-B-SG-1
- TDR48-RISZ1-L-B-SS-1
- TDR48-RISZ1-L-S-SG-1
- TDR48-RISZ1-L-S-SS-1
- TDR52-RISZ1-L-B-SG-1
- TDR52-RISZ1-L-B-SS-1
- TDR52-RISZ1-L-S-SG-1
- TDR52-RISZ1-L-S-SS-1
- TDR60-PTSZ1-L-B-SS-SS-1
- TDR60-PTSZ1-L-S-SS-SS-1
- TDR60-RISZ1-L-B-SS-1
- TDR60-RISZ1-L-S-SS-1
- TDR72-RISZ1-L-B-SSS-1
- TDR72-RISZ1-L-S-SSS-1
- TDR84-PTSZ1-L-B-SSS-SSS-1
- TDR84-PTSZ1-L-S-SSS-SSS-1
- TDR84-RISZ1-L-B-SSS-1
- TDR84-RISZ1-L-S-SSS-1
- TDR92-RISZ1-L-B-SSSS-1
- TDR92-RISZ1-L-S-SSSS-1
Repairs this series usually needs
- Beer foaming or pouring warm
- Warm cabinet from a dirty condenser
- Door gasket wear
- Probe codes on the display
- Drain clogging from spills
The TBR and TDR families cover back bar coolers and direct-draw beer coolers, where kegs sit inside the cabinet and lines run straight to the tap. Plate numbers such as TBR108-RISZ1-L-B-GGGG-1 are long and encode the size, door type and finish. The group lists 86 numbers.
Beer is sensitive to temperature, so a direct-draw cooler that runs warm shows up as foam at the tap. We check the cabinet temperature against what the beer needs, then the condenser, the gaskets and the fans. A keg cooler also needs a sound drain, since spills are routine.
We always ask for the full plate number, because the long codes tell us the door and finish. Beer is the best test of whether the cooler holds its range, so we ask how it pours before and after the repair.
About this series
- Back bar coolers and direct-draw beer coolers
- TBR and TDR prefixes
- Electronic control
- 86 model numbers listed
Other True bar refrigeration series
Why does my beer foam?
Warm beer foams. If the cabinet runs above the beer's range, we look at the condenser, the gasket and the control before the draft system.
What do the long numbers on the plate mean?
They encode size, door type, finish and other options. We use the full number to match parts, so please read us all of it. The finish also matters.
Do you service the draft lines too?
We repair the cooler. Cleaning draft lines is a separate task, and if the cooler is the cause of warm beer, we focus there. Warm beer is a cooler problem first.
Book repair for your True TBR and TDR Back Bar and Direct-Draw Coolers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.