Blendtec Stealth Series Blenders
Current line. 6 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- Stealth 875
- Stealth 885
- Stealth 895 NBS
- Stealth X
- Stealth Nitro
- Stealth Nitro X
Repairs this series usually needs
- Touch Error from a wet or stuck pad
- Overtemp Error from an overfilled jar or poor airflow
- Overload Error with hard or thick ingredients
- Reset errors cleared by Cancel or cycling power
- Jar leaks
The Blendtec Stealth series are above-counter and in-counter blenders with a touch interface and a sound enclosure. The models include the Stealth 875, 885, 895 NBS, Stealth X, Stealth Nitro and Stealth Nitro X. Bars and cafes choose them for quiet blending.
Messages on the display guide us. Touch Error means more than one sensor was touched, Overtemp Error means the motor is overheating, and Overload Error means the motor is overloaded. Unplug the blender before removing the jar or checking the blade. A jar that leaks may not be seated or the shaft may be loose.
The Stealth reports many messages, so the exact wording helps us. You get a written price first, and we tell you plainly if a repair is not worth it.
About this series
- Above-counter and in-counter blenders
- Touch interface with LCD
- Sound enclosure
Blendtec blenders codes
What does Touch Error mean?
More than one touch sensor was touched, or an icon is stuck on. Touch the center of the button, and if it stays on, unplug and re-plug.
Why does Overtemp Error appear?
The motor is overheating from an overfilled jar, hard or thick ingredients or poor airflow. Wait for it to cool, and call us if it will not work after 20 minutes.
What if several messages appear?
Write them all down and tell us the order. A cluster of messages can point to the control board rather than separate problems. A written price comes first, before any board is ordered.
Book repair for your Blendtec Stealth Series Blenders
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.