Huebsch Quantum Front-Load Washers, HFNL and HFNN
Current and older. 20 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- HFNLEFSP111CW01
- HFNLEFSP111CWNA
- HFNLERSP111CW01
- HFNLERSP111CWNA
- HFNLXFSP111CN01
- HFNLXFSP111CW01
- HFNLXRSP111CW01
- HFNLYFSP111CW01
- HFNLYFSP111CWNA
- HFNLYRSP111CW01
- HFNLYRSP111CWNA
- HFNNEFSP112CW01
- HFNNERSP112CW01
- HFNNXFSP111CW01
- HFNNXFSP112CN01
- HFNNXFSP112CW01
- HFNNXRSP111CW01
- HFNNXRSP112CW01
- HFNNYFSP112CW01
- HFNNYRSP112CW01
Repairs this series usually needs
- Door that will not lock or unlock
- Spin that stops when the load is unbalanced
- Washer that will not fill
- Water that drains slowly or not at all
- Card reader that loses contact
The HFNL and HFNN numbers are Huebsch front-load washers, 20 in all, such as HFNLEFSP111CW01 and HFNNXFSP112TW01. An inverter drive turns the drum, and a Quantum electronic control runs the cycle, with coin, card or on-premise payment depending on the machine.
Calls on these washers tend to start with the door. A front-loader will not begin a cycle until the lock confirms, and a lock that sticks or a switch that drifts will keep it from starting. After the door, we check the pressure sensor and the water valves for fill trouble, and the pump and hose for drain trouble. Unbalance stops lead us to the load sensing and the drive.
We repair them, quote the cost on paper first, and recommend a replacement only when it truly saves you money.
About this series
- Commercial front-load washers for coin, card or on-premise use
- Quantum electronic control with an inverter
- Prefixes HFNL and HFNN
- FLW1535C family
Huebsch washers codes
Other Huebsch washers series
HCA020QNHCA030QNHCA040QNHCA060QNHCA080QNHCA100QNHCD020QNHCD030QN+31 more→Huebsch HCB, HCD, HCH, HCL and HCZ Washer-ExtractorsCurrent and olderHCB040GNFHCD020GD2HCH020GNFHCH030GNFHCH040GNFHCH040GNVHCH060GNFHCH060GNV+20 more→Huebsch HCN Washer-Extractors in 20 to 100 lb SizesCurrent and olderHCN020GC2HCN020GD2HCN020GE2HCN020GN2HCN020GNFHCN020GNVHCN020GX2HCN020GY2+32 more→Huebsch HCU Washer-Extractors, 20 to 80 lbCurrent and olderHCU020GC2HCU020GD2HCU020GE2HCU020GL2HCU020GN2HCU020GNFHCU020GX2HCU020GY2+34 more→Huebsch HWNN Quantum Top-Load WashersCurrent and olderHWNNE2AP113CW01HWNNE2AP113CW04HWNNE2HP113CW01HWNNE2HP113CW04HWNNE2HP115CW01HWNNE2HP116CW01HWNNE2SP113CW01HWNNE2SP115CW01+17 more→Where is the model number on a Huebsch front-load washer?
Look for the data plate on the machine. The number begins with HFNL or HFNN for this group, and we use the whole string to match parts and control version.
Why will my front-load washer not lock its door?
The lock, the latch or the switch signal may be the cause. We test each of them and the wiring behind them, since a front-loader will not start until the control sees the door locked.
Do you repair card-operated Huebsch washers?
Yes. We check the card reader, its link to the control and the washer itself. A reader that has lost contact looks like a dead washer, so we confirm communication before touching other parts.
Book repair for your Huebsch Quantum Front-Load Washers, HFNL and HFNN
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.