Huebsch Lettered Top-Load Washers, HWTB to HWTZ
Older line. 21 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- HWTB21*M1102
- HWTB21*N1102
- HWTF21*M1102
- HWTF21*N1102
- HWTR21*N1102
- HWTT20*N
- HWTT21*N1102
- HWTV20*N
- HWTX21*M3020
- HWTX21*M3022
- HWTX21*N1102
- HWTX21*N3020
- HWTX21*N3022
- HWTY20*M
- HWTY20*N
- HWTY21*M1102
- HWTY21*N1102
- HWTZ20*M
- HWTZ20*N
- HWTZ21*M1102
- HWTZ21*N1102
Repairs this series usually needs
- Washer that takes coins but does not start
- Slow fill or a fill error
- Drain problem that leaves water behind
- Control that will not accept new settings
- Lid switch that does not make
Here a letter follows HWT, as in HWTB211*N and HWTX211*N, and the group has 21 numbers. They are not the common HWT1 or HWT2 patterns, so owners often do not know what they have until they read the data plate.
We begin with the plate, because the number tells us which control is fitted. Then the coin circuit gets tested, then the lid switch, then the fill and drain paths. On the older controls the same errors show up in different ways, which is why identifying the control is the first step.
These washers are a smaller part of what we see, but they are as repairable as any older top-loader. The estimate comes on paper before work, and we give you a candid view if a machine has run its course.
About this series
- Metered and non-metered top-load washers
- Letter after HWT, such as HWTB, HWTX and HWTZ
- Coin-slide, coin-drop or non-metered operation
- Control type varies by machine
Huebsch coin & card laundry codes
Other Huebsch coin & card laundry series
HWLX21*N1102HWNSX1SP301UW09HWT011*B3073HWT020*AHWT020*CHWT020*MHWT020*NHWT021*A1102+26 more→Huebsch HWT2 and HWT5 through HWT9 Metered Top-Load WashersOlder lineHWT210*A1102HWT210*C1102HWT210*M1102HWT210*N1102HWT211*A3000HWT211*B3020HWT211*C1102HWT211*C3000+27 more→What does the letter after HWT tell me?
It is part of the model number printed on the data plate. We read the whole number to find the control and the right parts.
My washer takes coins but does not start. What next?
We test the coin drop, the lid switch and the control output in order. A worn coin part is common on machines that have taken years of coins.
Do you keep older Huebsch washers going?
Yes, when the repair makes sense. These lettered models are older, so we confirm parts first, and if the machine is past a sensible repair, we talk through replacement before any work is done.
Book repair for your Huebsch Lettered Top-Load Washers, HWTB to HWTZ
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.