Continental Girbau Inteli Washer Error Code 101: All Programs Full
Code 101 means all the program slots are in use. Verify the program contents and delete the programs you no longer need.
Low: a programming message; the washer runs its existing programs.
- Code
- 101
- Maker
- Continental Girbau
- Equipment
- Coin & card laundry
- Applies to
- E-Series washer-extractors with Inteli control (sheet names RMG055 and smaller, EH060 and larger)
What does Continental Girbau error code 101 mean?
The Inteli control has a fixed number of program slots. When someone tries to save a new program and every slot is already taken, the control shows 101 (All programs full). It is a programming message and not a malfunction. The manual's action is to verify the contents of the programs and delete those that are unused, which frees a slot. The sheet gives checks for this code but no separate list of causes. Laundries that tune programs for different customers sometimes keep old copies, and these fill the memory over time. Before deleting anything, check that each program is really unused, because a deleted program cannot be brought back unless it was written down. A related message, 102, says there is no memory available, and 103 says the program itself is full. Together these three describe the different limits that can be reached while programming. If you are the person who adds programs, a short log of each program number and its purpose makes it far easier to decide what can go.
Affected models and control systems
Continental Girbau E-Series washer-extractors with Inteli control, sheet names RMG055 and smaller and EH060 and larger. Washers with Logi, LogiPro or Vended control use ALn alarms instead.
Code numbers and their meaning can change between control generations. We match the full model and control before acting on a code.
What you may notice
- Code 101 on the display
- New program cannot be saved
- Programming screen refuses a new entry
Possible causes
Likely causes — what usually sits behind error code 101 on this control. A technician confirms which one it is before any part is replaced.
- All program slots are used
- Old test programs never deleted
- Duplicate programs created while adjusting times
- Programs copied from another washer and left unused
Safe checks before calling for service
- Look through the list of programs and decide which are unused.
- Write down any program before deleting it.
- Delete an unused program to free a slot.
- Try to save the new program again.
How a technician diagnoses error code 101
- Confirm the code during programming and list the stored programs.
- Verify which programs are in use on site.
- Back up the settings of programs to be deleted.
- Delete unused programs.
- Save the new program and confirm it runs.
- Deleting a program removes the site's settings for chemicals and times.
- Misdeleted programs must be re-entered from records.
- Programming access may be restricted to supervisors.
How error code 101 differs from similar codes
Code 101 means all program slots are full. Code 102 means no memory is available, and code 103 means a single program is full.
Technical reference
- Document
- Inteli Control Error Codes ST-102. R2 E-Series Inteli Control
- Maker documentation
- Continental Girbau owner support
- Edition
- 7/17/2023
- Models / control
- E-Series washer-extractors with Inteli control (sheet names RMG055 and smaller, EH060 and larger)
- Section
- Alarm table, p.1-5
- Checked
- October 2026
We use the maker's document to read the code and do not reproduce it. Always confirm the complete model and control before applying these steps.
Related Continental Girbau coin & card laundry error codes
Is code 101 a breakdown?
No. It is a programming limit message.
What should I delete?
Only programs you are sure are unused, and write each one down first. A deleted program cannot be recovered from the washer, and the settings are the site's own record of times, temperatures and chemical steps.
What is the difference from 102?
101 means all slots are used. 102 means the memory itself is out of room.
Need help with Continental Girbau error code 101?
A technician confirms the cause on site and gives you the price in writing before any work starts.