Hobart LXe Advansys Undercounter Dishwashers
Current line. 4 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- LXeC
- LXeH
- LXePR
- LXeR
Repairs this series usually needs
- Wash arm alert from a clogged arm
- Low rinse temperature messages on repeated cycles
- Fill error or drain error that stops the machine
- Temperature probe messages that read open or short
- Scale on the booster and rinse arms
The LXe line is Hobart’s current undercounter dishwasher family. The model letters tell you how the machine sanitizes: LXeC and LXePR use a chemical rinse, LXeH uses a hot final rinse from a built-in booster, and LXeR adds energy recovery to that booster. Look for the model on the data plate before you call, because the checks differ.
The touch display names most problems in words, which helps us. Common calls are a wash arm alert, a low rinse temperature message, or a fill or drain error that leaves the machine waiting for power-down. We start with the water side, then the arms and the temperature probes, and we test the booster on the high-temperature models.
Water leaves scale on boosters and rinse arms, so the delime reminder is worth following.
About this series
- Undercounter dishwasher with touch controls and a diagnostic display
- LXeC and LXePR sanitize with chemicals at low temperature
- LXeH is high-temperature with a built-in booster for a 70F rise
- LXeR adds internal energy recovery and a booster
- Delime reminder alert setting
Hobart dish machines codes
Other Hobart dish machines series
AM15 (ML-130038)AM15F (ML-130045)AM15T (ML-130039)AM15VL (ML-130153)AM15VLF (ML-130155)AM15VLT (ML-130154)→Hobart CLe Series Conveyor DishwashersCurrent lineCL44eCL44eRCL64eCL44-DWR Steam→Older Hobart C-Line Rack Conveyor DishwashersOlder lineC44AC44AWC64ACRS66ACCS66ACPW80ACRS86ACCS86A+1 more→Where do I find the LXe model?
Look at the data plate on the machine. The letters after LXe, such as C, H, PR or R, tell us whether it is chemical or high-temperature, and that decides what we check first.
What do the on-screen messages mean for repairs?
Most messages name the problem, such as a wash arm alert or a fill error. Write down the exact wording and call us. We have pages for each LXe message on this site.
Do you repair LXe booster problems?
Yes. We test the booster, its probe and the rinse temperature on LXeH and LXeR models, and give you a written price before any part is replaced.
Book repair for your Hobart LXe Advansys Undercounter Dishwashers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.