Insinger Speeder 64 and 86 Double-Tank Rack Conveyors
Current line. 2 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- Speeder 64
- Speeder 86
Repairs this series usually needs
- Rack jam or conveyor drive problems
- Tank temperature low
- Final rinse low
- Scale in tanks and nozzles
- Pump problems
The Speeder is Insinger’s double-tank rack conveyor, made as the Speeder 64 and the Speeder 86. It uses about 0.52 gallons per rack and handles up to 277 racks an hour, so it earns its place in a busy dish room. The data plate shows the model.
When a Speeder falls behind, we start with the conveyor drive and the rack path, then the temperature of each tank and the final rinse. We check the pumps and the nozzles, since scale from water narrows the spray, and the strainers, which clog with food.
Tell us the model from the plate and what the machine did, and we confirm parts before the visit. You will hear the cost before we begin, and the repair labor is under a 30-day guarantee.
About this series
- Double-tank rack conveyor
- 0.52 gallons per rack
- 277 racks per hour
- Sizes Speeder 64 and Speeder 86
Other Insinger conveyor dish machines series
Admiral ADVANCED 44Admiral ADVANCED 66→Insinger Century Flight-Type Tray and Dish WashersCurrent lineCentury 14Century 17Century 19Century +21→Insinger Super 106 Three-Tank Rack ConveyorsCurrent lineSuper 106→Older Insinger Clipper, Master Clipper and Defender WashersOlder lineClipper RC18RPWWMaster ClipperDefender 17→How many racks does a Speeder handle?
The maker rates it at up to 277 racks per hour. A machine slower than it used to be may have a jam, a drive problem or a cool tank.
What is the difference between the Speeder 64 and 86?
They are two sizes of the same double-tank conveyor. The data plate shows which you have, and we confirm parts by that model. The plate carries the model, so read it to us on the call.
Why is my Speeder not cleaning well?
Clogged strainers, scaled nozzles or a cool tank are the usual causes. Each gets checked and we report back. We report what we found, and the cost comes first.
Book repair for your Insinger Speeder 64 and 86 Double-Tank Rack Conveyors
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.