Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Turbo Air · Prep tables

Turbo Air MST Mega and M-Series Prep Tables

Current line. 14 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • MST-24S-N6
  • MST-28-12-N
  • MST-28-N
  • MST-36-15-N6
  • MST-36-N6
  • MST-48-12-N
  • MST-48-18-N
  • MST-48-N
  • MST-60-16-N
  • MST-60-24-N
  • MST-60-N
  • MST-72-18-N
  • MST-72-30-N
  • MST-72-N

Repairs this series usually needs

  1. Warm pans on the rail
  2. Controller keys locked
  3. Dirty condenser
  4. Lid and gasket wear
  5. Drain clogging

The MST is the Turbo Air Mega Top prep table, with plate numbers such as MST-24S-N6, MST-28-12-N and MST-28-N. The number gives the width and sometimes the pan count. Fourteen numbers are in the family.

The controller has a set point, and its keys lock after one minute without use. A lit key-lock light is normal, and pressing U for two seconds unlocks the keys. When a table runs warm, we check the lid and the gasket first, then the condenser and the fans, then the sensor. We also look at how pans are loaded, since pans that stand above the rail block the cold air.

Tell us the plate number when you call, and we confirm the gaskets before the visit. We confirm the plate number first so the right gasket and lid parts are on the truck.

About this series

  • Refrigerated sandwich and salad prep tables
  • Electronic controller with a set point
  • Models such as MST-24S-N6 and MST-28-N
  • 14 model numbers
FAQTurbo Air MST Mega and M-Series Prep Tables questions
Why will the keys not respond?

They lock after one minute without use. Press U for two seconds to unlock them, then change the set point. The lock is a normal part of this control.

How should pans be loaded?

Keep them level with the rail and do not stack above it. Pans that stand too high block cold air and warm the food. Check that the lid closes fully afterward.

What does the mega top mean?

It is a deeper pan rail that holds more toppings. The cabinet below is similar, and we confirm the parts from the plate. The extra depth changes the lid.

Book a visit

Book repair for your Turbo Air MST Mega and M-Series Prep Tables

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit