Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · FETCO · Coffee brewers

Fetco CBS-2150 XTS Extractor Batch Brewers

Current line. 3 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • CBS-2151XTS
  • CBS-2152XTS
  • CBS-2152-2XTS

Repairs this series usually needs

  1. Code 001 software error at start-up
  2. Codes 050 and 051 for the temperature probe
  3. Fill codes 100, 101, 102, 103 and 107
  4. Code 201 for the heater circuit
  5. Code 255 touch pad error

The CBS-2150 series covers Fetco’s larger Extractor Touch Screen brewers, in 6 liter and 7.3 liter sizes. The data plate reads CBS-2151XTS, CBS-2152XTS or CBS-2152-2XTS. The touch screen shows numbered codes, each tied to one circuit.

Fill and level codes lead the list: 100 for a slow first fill, 101 for a refill that took too long, and 102, 103 and 107 for the level probes. Pure filtered water can confuse the level probe, and the manual lists a sensitivity setting for that.

Code 201 points to the heater, high limit or relay, so we test those with care before we replace any part. Please write down any code that shows and the model before you call, so we can bring the right parts.

About this series

  • Touch-screen batch brewers in 6-liter, 1.5 gallon and 7.3-liter, 2 gallon sizes
  • Models include CBS-2151XTS, CBS-2152XTS and CBS-2152-2XTS
  • Numbered error codes from 001 to 255
FAQFetco CBS-2150 XTS Extractor Batch Brewers questions
What does code 100 mean on a 2150 series brewer?

The first fill after power-up took more than 4 minutes because supply flow was too low. We check the shutoff, the filter and the inlet valve.

Why does a pure water filter cause code 107?

Very pure water, below 100 TDS, is hard for the level probe to sense. The owner's manual lists a sensitivity setting for it. If that does not help, we test the probe.

Can you reload the software after code 001?

Yes. Code 001 comes from a bad start-up or shutdown. We reload the software with the file for your model and test the control afterward.

Book a visit

Book repair for your Fetco CBS-2150 XTS Extractor Batch Brewers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit