MEIKO Pot and Pan Washer Repair
We repair MEIKO K-200 PW, K-400 PW and the LPW variants, the K-Tronic pot and pan washing conveyors, in Miami, Los Angeles, Houston, New York and San Diego. We check strainers, tank heat and the drive first, then quote the price in writing.
Common MEIKO pot & pan washers problems
In plain words, the way kitchen and laundry staff describe them when they call.
Strainers clogged with heavy soil
Wash water not hot enough
Conveyor stops
Foam in the wash tank
The K-200 PW and K-400 PW are pot and pan washing variants of the K-Tronic conveyor range, and the LPW versions sit alongside them. They are older machines, and many still do daily work in commercial kitchens. They scrub sheet pans, stockpots and heavy cookware, so the soil load is far higher than on a dish machine.
Heavy soil clogs the strainers first, and a clogged strainer starves the wash pump and lowers wash pressure. We clean and inspect the strainers, check the wash arms and nozzles, and then test the heater and the thermostat if the tank will not warm up. Foam in the wash tank causes malfunctions and poor results, so we also look at the detergent type and the amount being dosed.
These are legacy machines, so we confirm the model before the visit and tell you honestly when a repair no longer makes sense. A written price comes first, and the repair carries a 30-day warranty on our work.
Pot & Pan Washer
Every maker we repair in this category, with general problems and care.
Open the categoryMEIKO pot & pan washers lines we service
Current and older lines with their model numbers.
Why do pans come out dirty from my MEIKO pot washer?
Clogged strainers and wash nozzles are the most common cause, followed by low wash temperature and too much foam. Clean the strainers if the machine is off and cool. If pans still come out dirty, call us.
Do you still repair the MEIKO K-200 PW and K-400 PW?
Yes. These are older K-Tronic machines, and we repair them. Give us the model and what the machine does, and we plan the parts first. If the repair is not worth the money, we say so before we start.
What causes foam in my MEIKO wash tank?
Foam causes malfunctions and poor results on MEIKO machines. Too much or the wrong detergent is the first thing we check. Call us if the foam returns after you correct the dosing.
Other MEIKO equipment we repair
Other pot & pan washers makers we repair
Book MEIKO pot & pan washers repair
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.