Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Traulsen · Reach-in freezers

Traulsen Commercial Freezer Repair

We repair Traulsen reach-in and undercounter freezers in Miami, Los Angeles, Houston, New York and San Diego, including G-Series, R-Series RLT and RIF cabinets and older R and A Series units. You get a written price before work begins.

Reach-in freezersTraulsen
0model series listed
0error codes explained
30 daysworkmanship warranty
01What goes wrong

Common Traulsen reach-in freezers problems

In plain words, the way kitchen and laundry staff describe them when they call.

01

Freezer warm with a high temperature alarm

02

Heavy ice on the evaporator

03

Defrost heaters not working

04

Sensor error on the display

05

Freezer compressor stuck off

Traulsen freezers range from the G-Series freezer models to the R-Series RLT reach-in freezers and RIF roll-in freezers, plus the TU and ULT undercounter freezers. Many older R and A Series freezers with the Intela-Traul control are still working in restaurants today.

The G-Series control runs electric defrost on freezers at its own interval setting. When the evaporator is buried in ice, that cycle is not finishing, so we check the heaters, the termination sensor and the setting itself. Probe readings matter: we test the sensor in an ice bath and compare it with the expected resistance rather than replacing it on a guess.

Door gaskets count for more on a freezer than on any other cabinet. Every gap turns into frost, and frost raises the load on the compressor. We inspect the seals, clean the condenser and watch the pull-down after the repair. Some current Traulsen cabinets use hydrocarbon refrigerant, so sealed-system work should be left to a technician. On an older freezer we explain plainly what makes sense.

Commercial Freezer

Every maker we repair in this category, with general problems and care.

Open the category

Traulsen

Everything we repair from this maker.

Traulsen brand page
FAQTraulsen reach-in freezers questions
Why does my Traulsen freezer get frost on the evaporator?

The defrost cycle is probably not completing, or humid air is reaching the coil through a worn gasket. We test the heater, the termination sensor and the seals.

Can an older Traulsen R Series freezer be repaired?

Usually yes. The Intela-Traul control and most parts are well known to us, and we tell you honestly if the cabinet is past the point of a worthwhile repair.

What should I do first when the Traulsen freezer alarm sounds?

Check that the door is shut and the condenser is free of dust. If the alarm stays on, keep the freezer closed and call us before the food thaws.

Book a visit

Book Traulsen reach-in freezers repair

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit