Code decoder
TurboChef error codes
Pick the maker and the equipment, or type the code. Each page says what the code means on that control, what is safe to check and when to stop.
- Codes
- 2,442
- Makers with codes
- 98
- Updated
- November 2026
F5TurboChef HhC Oven Error Code F5: Cook Cavity Too HotF7TurboChef HhC Oven Error Code F7: RTD FailureF8TurboChef HhC Oven Error Code F8: High Limit TrippedF9TurboChef HhC Oven Error Code F9: Belt Run FailureF1: Blower Running Status BadTurboChef High-Speed Oven Error Code F1: Blower Running Status BadF2: Cook Temperature Low (HhC: F2: Low Temp During Cook; C3: LOW COOK TEMP / F2 LOW TEMP)TurboChef High-Speed Oven Error Code F2: Cook Temperature LowF3: Magnetron Current Low (C3: LOW MAG CURR / F3 MAG CURR)TurboChef High-Speed Oven Error Code F3: Magnetron Current LowF4: Door Monitor Defective (C3: DOOR MONITOR / F4 MONITOR)TurboChef High-Speed Oven Error Code F4: Door Monitor DefectiveF5: Magnetron Over Temperature (C3: MAG OVER TMP / F5 MAG TEMP)TurboChef High-Speed Oven Error Code F5: Magnetron Over TemperatureF6: EC Temp (HhC: EC Over Temp; C3: ELEC OVR TMP / EC TEMP HIGH / F6 EC TEMP)TurboChef High-Speed Oven Error Code F6: Electrical Compartment HotFault Code: F8 Fault (listed with 'oven is not warming up properly')TurboChef High-Speed Oven Error Code F8: Oven Not Warming Up ProperlyHX RISE LOWTurboChef High-Speed Oven Message HX RISE LOW: Heater Not RisingOVEN DOOR OPENTurboChef High-Speed Oven Message OVEN DOOR OPEN: Door Not ClosedWarning triangle / diagnostics screenTurboChef High-Speed Oven Warning Triangle: Diagnostics ScreenEr1, Er2, or HtTurboChef Oven Error Code Er1, Er2 or Ht: Defective Part Found
Book a visit
Code not listed, or no code at all?
A unit that shows nothing often points to power or the control. Call us with the maker and model number and we talk it through.