Beverage-Air CT Cross Temp Reach-Ins
Current line. 14 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- CT12-12HC
- CT12-12HC-1HG
- CT12-12HC-1HS
- CT12-12HC-1HSD
- CT1HC
- CT1HC-1G
- CT1HC-1HG
- CT1HC-1HS
- CT1HC-1S
- CT2HC
- CT2HC-1G
- CT2HC-1HG
- CT2HC-1HS
- CT2HC-1S
Repairs this series usually needs
- Temperature mode not holding after a switch
- Frost when set to freezer
- Door gasket wear
- Hi or Lo alarms
- Sensor codes
The CT Cross Temp is a Beverage-Air reach-in that can be switched between refrigerator and freezer temperatures. Plate numbers such as CT12-12HC and CT12-12HC-1HG are in the list of 14. The same box serves both roles, which suits kitchens that change their menus.
Switching modes changes how the cabinet defrosts and how the control behaves. If a CT will not hold temperature after a change, we check the set point, the sensor and the defrost mode. Frost in freezer mode points to the gasket or the defrost, and a warm refrigerator mode points to the condenser or fans.
Tell us which mode you run and what changed recently. After the repair we recheck the temperature in the mode you use, since the cabinet behaves differently as a refrigerator and as a freezer.
About this series
- Cross-temp reach-ins, switchable between refrigerator and freezer
- Models such as CT12-12HC and CT12-12HC-1HG
- Electronic control, Danfoss or Eliwell, read from the display
- 14 model numbers
Other Beverage-Air reach-in freezers series
FB12HC-1SFB19HC-1GFB19HC-1SFB23HC-1GFB23HC-1SFB27HC-1GFB27HC-1SFB35HC-1G+7 more→Beverage-Air HF Top-Mount FreezersCurrent lineHF1HC-1GHF1HC-1HGHF1HC-1HSHF1HC-1SHF1WHC-1SHF2HC-1GHF2HC-1HGHF2HC-1HS+5 more→Beverage-Air Horizon HBF Bottom-Mount FreezersCurrent lineHBF12HC-1HBF12HC-1-GHBF19HC-1HBF19HC-1-GHBF23HC-1HBF23HC-1-GHBF23HC-1-HGHBF23HC-1-HS+14 more→Beverage-Air PF, PFI, PFD and PFT Pass-Thru FreezersCurrent linePF1HC-1AHSPF1HC-1ASPF1HC-1BGPF1HC-1BHGPF2HC-1AHSPF2HC-1ASPF2HC-1BGPF2HC-1BHG+4 more→Beverage-Air SMF and STF School Milk FreezersCurrent lineSMF34HCSMF49HCSMF58HC→Beverage-Air UCF Undercounter FreezersCurrent lineUCF20HCUCF20HC-25-15UCF24AHCUCF24HCUCF27AHCUCF27HCUCF32AHCUCF36AHC+10 more→Beverage-Air WTF Worktop FreezersCurrent lineWTF20HCWTF20HC-FIPWTF20HC-FLTWTF24AHCWTF24AHC-25WTF24AHC-FIPWTF24AHC-FLTWTF27AHC+44 more→Beverage-Air WTFCS 36 Inch Worktop FreezersCurrent lineWTFCS36HCWTFCS36HC-48→How do I switch a CT between modes?
Follow your owner's manual for the control on your cabinet. If the cabinet does not settle, call us. Allow several hours for the temperature to settle after a switch.
Why is the cabinet warm after I changed modes?
It needs time to pull down, and the defrost settings must match. If it stays warm, we check the sensor and settings. It needs hours to pull down, and the defrost settings must match the mode. If it stays warm, we test the sensor.
Can the CT run as a freezer all the time?
Yes. It is designed for either role, and we service both. Yes, the CT is designed for either role, and we service it in both modes. Tell us which mode you use most and we test it there.
Book repair for your Beverage-Air CT Cross Temp Reach-Ins
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.