Hobart N50 5-Quart Countertop Mixer
Current line. 1 model number in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- N50
Repairs this series usually needs
- Mixer that will not start
- Speed lever that slips or sticks
- Gear noise
- Grease leaking at the head
The Hobart N50 is a 5 quart countertop mixer with mechanical controls. You find it in small bakeries, cafes and prep kitchens, and the model number N50 is on the data plate. It is a simple machine, which is part of why so many have lasted.
Because the controls are mechanical, a no-start usually points to the switch, the speed lever linkage or the motor. We also check the gears and grease, since an old N50 can seep grease at the head. Heat and moisture in a kitchen age the switch contacts over time, and a sticky lever is often just worn linkage.
An N50 that has run for a decade is usually worth a small repair, because the machine is simple and the parts are few. We give a written price first, and we tell you honestly if a replacement would serve you better.
About this series
- 5 quart countertop mixer
- Mechanical controls
- Small bench footprint
- Model number N50
Hobart mixers codes
Other Hobart mixers series
HSL130HSL180HSL220HSL300HSU440→Hobart Legacy+ HL120 and HL200 Countertop Planetary MixersCurrent lineHL120HL200→Hobart Legacy+ HL300 and HL400 Floor Planetary MixersCurrent lineHL300HL400→Hobart Legacy+ HL600, HL800 and HL1400 Floor MixersCurrent lineHL600HL800HL1400→Hobart Legacy+ HL662 Pizza Dough MixerCurrent lineHL662→How big is the N50?
It is a 5 quart countertop mixer with mechanical controls. The model number N50 is on the data plate, and it helps us confirm the right parts before we come out to you.
Why does my N50 not start?
With mechanical controls, we check the switch, the speed lever linkage and the motor in turn. We give a written price before ordering any part, so you know the cost first.
What wears out first on a small countertop mixer?
The switch contacts, the speed lever linkage and the grease at the head tend to go first. Those are small, inexpensive repairs, and we can usually show you the worn part when we finish.
Book repair for your Hobart N50 5-Quart Countertop Mixer
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.