Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Hussmann · Display cases

Hussmann Entyce TY3 and TY4 Island Display Cases

Current line. 8 model numbers in this series.

Schedule a Visit(844) 393-0816
01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • TY3-R
  • TY4-R
  • TY3-S
  • TY4-S
  • TY4-ECRC
  • TY4-ECSQ
  • TY3ECRC
  • TYA3ECRC

Repairs this series usually needs

  1. Case temperature high and product warm
  2. Defrost problems, ice build-up and drain overflow
  3. Condenser and condensate pan buildup on self-contained cases
  4. Controller probe or display problems
  5. Fan motor or honeycomb obstruction

The Entyce TY3 and TY4 are island cases, sold as remote versions like the TY3-R and TY4-R, and self-contained versions like the TY3-S and TY4-S. The controllers used are the Danfoss AK-CC 210 and the Dixell XR75CX, with parameter lists for each.

The maker rates the case for store conditions of 75 F and 55 percent humidity. The service tips are clear: clean the discharge honeycomb, the condenser and the condensate pan at least twice a year, change the filter every six months, and never use a water hose on self-contained cases.

We check the condenser and pan, the honeycomb and fans, then defrost and the controller. Read us the model number on the case and tell us whether it is the remote or self-contained version.

About this series

  • Island display cases in remote (R) and self-contained (S) versions
  • Models TY3-R, TY4-R, TY3-S, TY4-S and the ECRC and ECSQ versions
  • Danfoss AK-CC 210 or Dixell XR75CX controllers
  • R-404A and R-448A options
  • Rated for 75 F and 55 percent humidity
→Codes

Hussmann display cases codes

E1Hussmann Display Refrigerator Error Code E1: Case Temperature Sensor FailedE2Hussmann Display Refrigerator Error Code E2: Evaporator Sensor FailedRed LED on during operationHussmann Display Refrigerator Error Code: Red LED On During OperationRed LED stays on after startupHussmann Display Refrigerator Error Code: Red LED Stays On After Startup
→Same maker

Other Hussmann display cases series

Hussmann CoreLink Electronic Case ControllersCurrent lineHussmann Impact Series MerchandisersCurrent and olderImpact MT (P/N 0378414_H)Impact LT (P/N 0395730F)Impact service merchandisers (P/N 0420057_D)Impact Reach-In (P/N 0387183_V)Hussmann SHM, DDSS, RFLN and Other Display CasesCurrent and olderSHMSHM-3SHM-4SHM-4BWSHM400DDSS-4MCSMG8BSSG8B+6 more
FAQHussmann Entyce TY3 and TY4 Island Display Cases questions
How often should the case be cleaned?

The maker says to clean the discharge honeycomb, the condenser and the condensate pan at least twice a year, and to replace the filter every six months.

Can I use a hose to clean it?

No. The maker says not to use a water hose on self-contained cases. Use the cleaning method in the owner guide, or call us and we handle it.

Which controller is in my case?

The cases use the Danfoss AK-CC 210 and the Dixell XR75CX. The display tells us which one you have, and the model number confirms it for us.

Book a visit

Book repair for your Hussmann Entyce TY3 and TY4 Island Display Cases

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

(844) 393-0816
Open the booking form
☎ Call our office ▤ Schedule a Visit