Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Beverage-Air · Reach-in freezers

Beverage-Air FB Bottom-Mount Freezers

Current line. 15 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • FB12HC-1S
  • FB19HC-1G
  • FB19HC-1S
  • FB23HC-1G
  • FB23HC-1S
  • FB27HC-1G
  • FB27HC-1S
  • FB35HC-1G
  • FB35HC-1S
  • FB44HC-1G
  • FB44HC-1S
  • FB49HC-1G
  • FB49HC-1S
  • FB72HC-1G
  • FB72HC-1S

Repairs this series usually needs

  1. Condenser clogged near the floor
  2. Frost on the coil
  3. Hi alarm
  4. Door gasket wear
  5. Sensor codes

The FB is the Beverage-Air bottom-mount freezer line, with numbers such as FB12HC-1S, FB19HC-1G and FB19HC-1S. Fifteen numbers are listed. The compressor and condenser sit below the freezer compartment, close to the floor.

Floor-level condensers pick up dust and flour. A freezer on a dirty condenser runs hot and long, and frost forms quickly. We clean the coil first, then check the gaskets, the defrost and the fans. The control may be a Danfoss or an Eliwell, and the alarm wording differs.

Give us the plate number when you call and we bring the right gaskets and parts. A freezer that has been warm should be judged by the food, not the display, and we check product temperature after the repair.

About this series

  • Bottom-mount reach-in freezers
  • Models such as FB12HC-1S and FB19HC-1G
  • Controller brand varies between Danfoss and Eliwell
  • 15 model numbers
FAQBeverage-Air FB Bottom-Mount Freezers questions
Why does my FB run all the time?

A dirty condenser or a leaking gasket makes it work harder. We clean the coil and check the seals. We test the door seal and the fans too.

Does a bottom-mount need more cleaning?

Often yes, because the condenser is near floor dust. A monthly brushing helps. Floor dust clogs the fins, so brushing the coil each month keeps the freezer running cold and quiet, and it adds years to the life of the compressor.

How do I know the controller type?

Look at the alarm wording. Hi and Lo are Danfoss, AH1 and AL1 are Eliwell. Photographing the display and sending it to us helps us confirm which control you have before the visit.

Book a visit

Book repair for your Beverage-Air FB Bottom-Mount Freezers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit