Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Anets · Fryers

Anets Gold GoldenFry Gas Fryers

Current line. 4 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • AGG14
  • AGG14R
  • AGG14T
  • AGG18

Repairs this series usually needs

  1. Pilot or ignition will not hold
  2. Burners light late
  3. Filter pump slow
  4. Thermostat or control reading off

GoldenFry is the Gold line of gas fryers from Anets. They come in 14 and 18 inch sizes with filtration, and the model on the data plate starts with AGG, as in the AGG14T or AGG18.

These fryers see daily filtering, so the pump, the pan seals and the return line deserve attention. Burners and ignition are the other side of the job, and we also check the thermostat or control and the high limit.

After many years of service a GoldenFry may have worn valves and a tired pot. We repair what makes sense and give you a plain answer when it does not. Note the model and any message on the screen before you call, and we will plan the visit around it.

About this series

  • 14 and 18 inch gas fryers
  • Built-in filtration
  • AGG14, AGG18 and their R and T versions
  • Gas tube heating
FAQAnets Gold GoldenFry Gas Fryers questions
How do I read the AGG model number?

AGG is the Gold line and the number is the width in inches, so an AGG14 is 14 inches wide. Letters after the number mark options such as the filter or the control type.

Why is the GoldenFry filter pump slow?

Cold oil, a dirty pad or worn seals are common reasons. Let the oil cool and call us. We check the pump and lines and quote in writing.

Can you repair a GoldenFry that is many years old?

Yes. We service older units and confirm the parts we need before the visit. Should the repair cost more than it is worth, we say so and go over your options.

Book a visit

Book repair for your Anets Gold GoldenFry Gas Fryers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit