Stero SD1 Chemical-Sanitizing Door-Type Dishwashers
Current and older. 1 model number in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- SD1
Repairs this series usually needs
- Chemical sanitizer pump not primed
- Door cycle switch problems
- Tank not filling or draining
- Sanitizer weak
- Scale and film
The SD1 is a Stero door-type dishwasher that sanitizes with chemicals. It washes about 37 racks an hour on 120 volts and a 14 amp supply, and it starts a cycle from a door cycle switch. The maker recommends at least 140F incoming water, and chemical pumps are included.
When an SD1 does not sanitize, we check the canister and pump first, then the fill and drain and the door cycle switch. Sanitizing needs a 120F final rinse at minimum, so the incoming water matters. Water leaves scale and film.
Wear the gloves and eye protection the chemical maker calls for when you change canisters, and never bypass a chemical pump or the door switch. The quote is agreed before work starts.
About this series
- Door-type chemical-sanitizing dishwasher
- 37 racks per hour
- 1.7 gallons per rack
- 120 volt, 14 amp
- Needs 140F minimum incoming water
Stero dish machines codes
Other Stero dish machines series
What water temperature does the SD1 need?
The maker recommends at least 140F incoming water, and chemical sanitizing needs a final rinse of at least 120F. If your hot water is cooler, tell us and we check the supply.
The sanitizer pump is not primed. What now?
Check the canister is not empty and the line is in the product. If it will not prime, call us. Do not bypass the pump.
Do you repair older SD1 machines?
Yes. Many kitchens still run an SD1, and we repair it. The cost is quoted first, and we are honest if the repair would not pay.
Book repair for your Stero SD1 Chemical-Sanitizing Door-Type Dishwashers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.