UniMac UW Pocket Hardmount Washer-Extractors, UniLinc Control
Older line. 7 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- UW35TV
- UW60TV
- UW80TV
- UW100TV
- UW125TV
- UW150TV
- UW60P2
Repairs this series usually needs
- Door lock message that stops the cycle
- Fill alarm when the level is not reached
- Slow drain or a drain alarm
- Unbalanced load that cuts the extract speed
- Leak message after a cycle
The UW pocket washer-extractors are among the older UniMac machines still working laundries. The UniLinc models run from the UW35TV up to the UW150TV, and the UW60P2 is an older machine with the WE-6 computer. The model number is on the data plate, and a T in it means UniLinc control.
UniLinc keeps a log of the last eight errors with the date and time, and it counts errors in an audit, so we read the log before we pick up a tool. It shows its problems as named messages rather than short codes. Door, fill and drain messages send us to the lock, the water supply and the pump. An unbalance message sends us to the load and the suspension.
We repair older UW machines when parts can be found. Call us or fill out the online form to schedule service. The estimate is in writing before the work, and a washer-extractor beyond a fair repair gets a frank answer.
About this series
- Pocket hardmount high-spin washer-extractors
- UniLinc computer control on the UW35TV to UW150TV models
- WE-6 computer on the older UW60P2
- T in the number means UniLinc; V means eight speeds
UniMac industrial laundry codes
Other UniMac industrial laundry series
What does the T in UW60TV mean?
The T means the washer has the UniLinc computer control, and the V means it has eight speeds. The data plate shows the full number we use to match parts and control.
Can you read the error history on a UniLinc washer?
Yes. The control keeps the last eight errors with their date and time, and we read that history first, so we repair what the washer actually reported rather than guess.
Is the old UW60P2 still repairable?
It can be, if parts can be found. The UW60P2 uses the older WE-6 computer, so we confirm what we need before the visit, and the cost is weighed against the value of the machine before any work.
Book repair for your UniMac UW Pocket Hardmount Washer-Extractors, UniLinc Control
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.