Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · IPSO · Industrial laundry

IPSO IPD 120 and 170 lb Tumble Dryers

Older line. 4 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • IPD120G2
  • IPD120S2
  • IPD170G2
  • IPD170S2

Repairs this series usually needs

  1. Burner that shuts off on an airflow message
  2. Open or shorted thermistor message
  3. Long drying times
  4. Gas ignition that does not light
  5. Drum that does not turn

The IPD dryers come in four numbers: IPD120G2, IPD120S2, IPD170G2 and IPD170S2. The first digits give the size, 120 or 170 pounds, and G2 or S2 at the end shows gas or steam heat. The data plate carries the number.

The On Premise Micro control watches a thermistor and an airflow switch. A poor airflow message shuts the burner off, so we check lint screens, the duct and the exhaust hood before the switch. OP and SH messages point to the thermistor circuit. On a steam dryer we check the steam supply and valve, and on a gas dryer we close the gas shut-off before any service.

These are older, large dryers, and we repair them. Call us or fill out the online form to schedule service. The cost is set out on paper first, and we are honest when a dryer is finished.

About this series

  • Large tumble dryers in 120 and 170 lb sizes
  • Gas (G2) or steam (S2) heat
  • On Premise Micro control
  • Four numbers: IPD120G2, IPD120S2, IPD170G2 and IPD170S2
FAQIPSO IPD 120 and 170 lb Tumble Dryers questions
What do G2 and S2 mean in IPD120G2?

G2 marks the gas-heated version and S2 marks the steam-heated version. The size is the 120 or 170 before it, in pounds, and the data plate shows the complete number.

Why does the burner shut off by itself?

The control may have seen low airflow. We clear and check the lint screen, the duct and the hood first, then the airflow switch, before replacing any part.

Do you repair steam dryers as well as gas?

Yes. On a steam dryer we check the steam supply and valve, and on a gas dryer we check ignition. Both need a clear exhaust, so we look at the lint screen and the duct on every visit.

Book a visit

Book repair for your IPSO IPD 120 and 170 lb Tumble Dryers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit