Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Champion · Conveyor dish machines

Champion Conveyor Dishwasher Repair

We repair Champion 44 PRO, 54 PRO, 64 PRO and 66 PRO rack conveyors and EUCC flight machines in Miami, Los Angeles, Houston, New York and San Diego. We start with the jam monitor, the tanks and the final rinse, then quote the price in writing.

Conveyor dish machinesChampion
2model series listed
0error codes explained
30 daysworkmanship warranty
01What goes wrong

Common Champion conveyor dish machines problems

In plain words, the way kitchen and laundry staff describe them when they call.

01

Rack jam alarm trips

02

Conveyor stops mid-cycle

03

Tank temperature stays low

04

Final rinse too cool

05

Automated delime does not finish

The PRO series rack conveyors have a perpetual rack advance with digital jam monitoring and an automated delime function. The 44 PRO handles about 209 racks an hour, the 54 PRO 255, and the two-tank 64 PRO 348. The 66 PRO has a front feed with a 44 inch main section and a 22 inch prewash. HR and VHR versions add heat recovery, and the 33BD-PRO is a blower dryer. The EUCC and EUCCW are 24 and 29 inch flight machines in Slim Line and Flight Pro versions.

When the jam monitor trips, we look at the rack path, the drive and the sensor before we look at the control. A tank that will not come up to temperature gets a check of the heater, thermostat and level, and a cool final rinse sends us to the booster and rinse supply. Where the water is hard, scale gathers on heaters and rinse nozzles, so the delime function matters.

We confirm the model first so the right parts come with us, and every repair carries our 30-day warranty on our work.

Conveyor Dishwasher

Every maker we repair in this category, with general problems and care.

Open the category

Champion

Everything we repair from this maker.

Champion brand page
FAQChampion conveyor dish machines questions
What does a rack jam alarm on my Champion conveyor mean?

The jam monitor sensed that a rack stopped moving. Clear the rack path if the machine is off and it is safe. If the alarm comes back, call us and we check the drive and the sensor.

Why is my Champion conveyor tank not hot enough?

A heater, thermostat or level circuit that is not working is the usual cause. Make sure the tank filled. If it is full and still cool, call us and we test each part in order.

Do you repair Champion EUCC flight machines?

Yes. We repair EUCC and EUCCW flight machines, including the Slim Line and Flight Pro versions. Tell us the model and the problem and we bring the parts to match.

Book a visit

Book Champion conveyor dish machines repair

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit