Blakeslee Commercial Mixer Repair
We repair Blakeslee F-20, DD-40 and DD-60 floor planetary mixers and B-20 bench mixers in Miami, Los Angeles, Houston, New York and San Diego. We check the bowl lift, gears, belt and motor first, then give you a written price.
Common Blakeslee mixers problems
In plain words, the way kitchen and laundry staff describe them when they call.
Bowl lift will not hold or move
Gear noise or grease leak
Belt slipping
Motor overload trips
Mixer will not start
Blakeslee’s floor planetary mixers come in 20, 40 and 60 quart sizes as the F-20, DD-40 and DD-60. The B-20 bench mixers, including the B-20-SS, B-20-CA, B-20-CS and B-20-D, hold 20 quarts. These are mechanical machines without display codes, so we diagnose them by sound, movement and testing.
The bowl lift is the part that gets abused. A bowl that will not lift or hold its height points us to the lift mechanism and its linkage. A belt that slips shows up as an attachment turning slowly under a load, and we check belt tension and wear. A motor that trips its overload may be fighting a heavy dough, a worn belt or a failing bearing. Grease leaking from the gear case means a seal needs attention, and we check the gear oil level and the gears before they are damaged.
Bakeries and kitchens put long hours on these mixers. We confirm the model first, tell you honestly if an older mixer is not worth repairing, and back the repair with a 30-day warranty on our work.
Commercial Mixer
Every maker we repair in this category, with general problems and care.
Open the categoryBlakeslee mixers lines we service
Current and older lines with their model numbers.
Why does my Blakeslee mixer keep tripping its overload?
A heavy dough load, a worn belt or a motor or bearing problem can all trip the overload. Let the motor cool and reduce the load. If it trips again, call us and we test the motor and drive.
Why is grease leaking from my Blakeslee mixer?
Grease leaking from the gear case means a seal has worn. Wipe it up, keep it off the floor and call us. We check the seal, the gear oil and the gears before they are damaged.
Do you repair the Blakeslee B-20 bench mixer?
Yes. We repair the B-20-SS, B-20-CA, B-20-CS and B-20-D bench mixers along with the F-20, DD-40 and DD-60 floor models. Tell us the model and the problem and we plan the visit.
Other Blakeslee equipment we repair
Other mixers makers we repair
Book Blakeslee mixers repair
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.