Error code · Eversys · Super-automatic coffee

Eversys Coffee Machine Error Code S-025: Grounds Drawer Full

S-025 means the grounds drawer is full and should be emptied as soon as the running product has finished. Wait for the drink to finish, then empty the drawer.

Medium · inspection needed

Medium: the drawer must be emptied before further drinks.

(844) 393-0816

Code: S-025
Maker: Eversys
Equipment: Super-automatic coffee
Applies to: Eversys Cameo range (Cameo/Core, Classic, ST, in-box), e'Support article

What does Eversys error code S-025 mean?

The Cameo watches how full the grounds drawer is. If it fills while a drink is being made, the control shows "Grounds drawer is full. Please wait until the running product has finished..." as S-025. The maker's table says to empty the grounds drawer as soon as the running product has finished. It gives no other cause. The difference from S-021 is the timing: the machine lets the current drink complete and then asks for the drawer to be emptied. Pulling the drawer out in the middle of a product would spill grounds, so wait for the drink to end first. This gives the operator a short wait instead of a sudden halt in the middle of a cup. The table words it as a wait, which fits an operator who would otherwise pull the drawer mid-drink.

Affected models and control systems

Eversys Cameo range (Cameo/Core, Classic, ST and in-box versions), as covered by the maker's e'Support table of S-number stop messages.

Code numbers and their meaning can change between control generations. We match the full model and control before acting on a code.

What you may notice

S-025 while a drink runs
The grounds drawer is full
The machine finishes the current drink first

Possible causes

Likely causes — what usually sits behind error code S-025 on this control. A technician confirms which one it is before any part is replaced.

Grounds drawer full while a product is running
The drawer was not emptied after the last busy period
A drawer level sensor that reads full too early

Safe checks before calling for service

✓ What an operator can do

Let the running drink finish.
Pull out the grounds drawer and empty it.
Slide it fully back in.
If S-025 comes back at once, report it.

How a technician diagnoses error code S-025

Check the drawer level sensor.
Reset the grounds count.
Test the input at the board.
Replace the sensor if it reads full when empty.

! Leave this to a technician

The sensor is read live at the control board.
A wrong count is stored in the machine.

How error code S-025 differs from similar codes

S-021 is the stop message for the grounds bin; S-025 gives the drawer time to finish the drink.

Technical reference

Document: Operator stop messages for Cameo (S-XXX)
Models / control: Eversys Cameo range (Cameo/Core, Classic, ST, in-box), e'Support article
Section: Web page table of S-numbers, Infos messages and Explanations / Remedies (no page numbers)
Checked: October 2026

We use the maker's document to read the code and do not reproduce it. Always confirm the complete model and control before applying these steps.

→Same maker

Related Eversys super-automatic coffee error codes

S-025Questions about Eversys error code S-025

Should I empty it right away?

No. The table says to do so as soon as the running product has finished.

Will the drink in progress be lost?

The text says to wait for the product, implying it completes.

It returns right after emptying. Why?

The sensor may be reading full wrongly.

Book a visit

Need help with Eversys error code S-025?

A technician confirms the cause on site and gives you the price in writing before any work starts.

(844) 393-0816

Open the booking form