Eversys Coffee Machine Error Code W-048: Milk Blocked at Weekends
W-048 means milk products are blocked at weekends by a setting. The message does not point to a failure; a technician or manager can change the setting if milk should be served on those days.
Low: a configured restriction on milk products; other drinks are not blocked.
- Code
- W-048
- Maker
- Eversys
- Equipment
- Super-automatic coffee
- Applies to
- Eversys Cameo range (Cameo/Core, Classic, ST, in-box), e'Support article
What does Eversys error code W-048 mean?
Some Cameo machines are set up so that milk drinks are switched off on certain days; the table does not give the reason for the rule. When a milk product is chosen on a blocked day, the control shows "During the weekend milk products aren't allowed!" as W-048 and does not make the drink. The maker's table gives the meaning as a weekend block set in the settings and lists no action and no cause. Coffee-only products are not described as affected. Because this is a rule and not a part that has failed, nothing needs repair. If the block is not wanted, the setting that controls it must be changed in the machine's configuration, which the table does not describe.
Affected models and control systems
Eversys Cameo range (Cameo/Core, Classic, ST and in-box versions), as covered by the maker's e'Support table of W-number warning messages.
Code numbers and their meaning can change between control generations. We match the full model and control before acting on a code.
What you may notice
- W-048 when a milk drink is chosen on a Saturday or Sunday
- Milk products are refused while coffee is served
- Milk drinks work again on weekdays
Possible causes
Likely causes — what usually sits behind error code W-048 on this control. A technician confirms which one it is before any part is replaced.
- A setting that blocks milk products at the weekend
- The weekend block was set deliberately by whoever installed the machine
- The machine's clock or date is wrong, so the block applies on the wrong days
Safe checks before calling for service
- Check the day and the time shown on the display.
- Ask the manager whether the weekend milk block was intended.
- Offer coffee-only drinks while the block applies.
- If the block should not be on, report the days and times it appears.
How a technician diagnoses error code W-048
- Read the weekend setting in the service menu.
- Check the machine's date, time and time zone.
- Change or remove the block if the customer asks for it.
- Test a milk drink at the weekend afterward.
- The weekend setting sits in protected service settings that are not meant for operators.
- If the clock is wrong, other timed functions such as cleaning may be affected too.
How error code W-048 differs from similar codes
This one is a rule set by configuration, unlike W-024 or W-019 which report a supply or pressure condition.
Technical reference
- Document
- Operator warning messages for Cameo (W-XXX)
- Models / control
- Eversys Cameo range (Cameo/Core, Classic, ST, in-box), e'Support article
- Section
- Web page table of W-numbers, Infos messages and Explanations / Remedies (no page numbers)
- Checked
- October 2026
We use the maker's document to read the code and do not reproduce it. Always confirm the complete model and control before applying these steps.
Related Eversys super-automatic coffee error codes
Is W-048 an error?
No. It reports that a setting is blocking milk products on weekends.
Can I serve coffee?
The table says only that milk products are blocked, so coffee-only products should be available.
How do I turn it off?
It is a setting. The table does not say how, so ask a technician or whoever configured the machine.
Need help with Eversys error code W-048?
A technician confirms the cause on site and gives you the price in writing before any work starts.