Kold-Draft 50 Hz Export Ice Makers
Older line. 6 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- GB457
- GB657
- GB1257
- GB1258
- GT357
- GT557
Repairs this series usually needs
- Power supply and frequency mismatch
- Water plate and cycle timing
- Fill and float problems
- Relay wear
The 50 Hz Kold-Draft models are the GB457, GB657, GB1257, GB1258, GT357 and GT557. They were built for countries that use 50 Hz power, so they sometimes show up through imports or relocated equipment. They use electromechanical controls and have no error code table.
The first thing we check is that the machine is on power it was built for, because a 50 Hz machine on 60 Hz power does not behave the same way. After that, the work is the same as other Kold-Draft machines: water plate, fill, probe and condenser.
Tell us the full model number and where the machine was bought, and we plan the visit from there. Please have the data plate details handy.
About this series
- Export clear-cube makers for 50 Hz power
- Models GB457, GB657, GB1257, GB1258, GT357 and GT557
- Electromechanical controls
- Older export line
Kold-Draft ice machines codes
Other Kold-Draft ice machines series
GT361AHKGT361ACGT361LCGT361LHKGT364AHKGT364ACGT364LCGT364LHK+35 more→Kold-Draft Older 30, 40 and 50 Series Ice MakersOlder lineGT331GT334GT341GT344GT351GT354GT551GT554+19 more→Kold-Draft Older GB Ice MakersOlder lineGB337GB347GB440GB561AKGB1064LGB657GB250→Why would I have a 50 Hz machine?
Some machines arrive through imports or from relocations. The data plate states the frequency, and we check it before anything else, so we do not guess.
Can it run on 60 Hz power?
Not necessarily. The data plate shows what it was built for, and we do not guess. Tell us what you have and we look at it in person.
Do you service it like other Kold-Draft machines?
Yes, with the same water plate, fill, probe and condenser checks, once we have confirmed that the power supply is the right one for this machine.
Book repair for your Kold-Draft 50 Hz Export Ice Makers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.