Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Beverage-Air · Bar refrigeration

Beverage-Air Bar Refrigerator Repair

We repair Beverage-Air back bar coolers, direct draw dispensers, bottle coolers and deep well units for bars and restaurants in Miami, Los Angeles, Houston, New York and San Diego. We find the cause first, and you get a written price before work starts.

Bar refrigerationBeverage-Air
5model series listed
0error codes explained
30 daysworkmanship warranty
01What goes wrong

Common Beverage-Air bar refrigeration problems

In plain words, the way kitchen and laundry staff describe them when they call.

01

Back bar cooler not cold enough

02

Direct draw beer pouring foamy

03

Deep well alarm AH1 or OPd

04

Bottle cooler door not sealing

05

Sensor error E1 to E4

Beverage-Air bar equipment includes BB back bar coolers with hinged or sliding doors, DD direct draw dispensers, BM bottle coolers, DW deep well bottle coolers and the FLG glass froster. Most use an electronic controller, and the DW units use one with AH1, AL1 and OPd alarms plus E1 to E4 sensor codes.

A bar cooler lives in a hard spot: under a counter with little air, doors open all night, spilled drinks on the floor. The condenser should be cleaned about every quarter, and more often during a hot summer. When it fills with dust, the cooler sits in a high temperature alarm and the compressor wears out early.

On direct draw units a steady temperature matters for the pour, so we confirm the cabinet holds its set point and not only that it feels cold. A deep well showing AH1 points to high temperature, while OPd points to a lid or door left open. We check the gaskets, drain and sensors, and we tell you straight when an older cooler is not worth repairing.

Bar Refrigerator

Every maker we repair in this category, with general problems and care.

Open the category

Beverage-Air

Everything we repair from this maker.

Beverage-Air brand page
FAQBeverage-Air bar refrigeration questions
What does OPd mean on a Beverage-Air deep well?

OPd is the open door alarm. A lid or door that is not fully closed sets it off. If it stays on after closing, we test the switch and the gasket.

Why is my direct draw beer cooler pouring foam?

Pour quality depends on a steady temperature. We check the set point, the sensor and the cooling system, since a drifting cabinet gives foamy beer.

How do I schedule a bar cooler repair around service hours?

Tell us when the bar is quiet. We confirm a three-hour arrival window, and we give you the written price before we begin any work.

Book a visit

Book Beverage-Air bar refrigeration repair

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit