Beverage-Air Prep Table Repair
We repair Beverage-Air sandwich and salad prep tables, pizza prep tables and topping stations in Miami, Los Angeles, Houston, New York and San Diego. We check the rail, cabinet and controller, and give you a written price before any work starts.
Common Beverage-Air prep tables problems
In plain words, the way kitchen and laundry staff describe them when they call.
Pans in the rail not staying cold
Cabinet alarm with Hi showing
Pizza table drawers not cold
Water leaking under the table
Controller showing a sensor code
Our Beverage-Air prep table work covers SPE and SPED sandwich and salad tables from 27 to 72 inches, DP and DPD pizza prep tables with and without drawers, and the TPE topping station. The controllers are electronic and come from one of two suppliers, depending on the build.
Prep tables work harder than most refrigeration. The lid goes up and down all shift, hot line equipment sits close by, and customers expect cold toppings in July. When the rail is warm, we look at pan fit, lid seal and the air path before testing the cooling system, because a pan set too high often explains it.
A dirty condenser is a common reason for a Hi alarm on these tables, particularly in a kitchen with a fryer nearby. We also check the drain, since a clogged line sends water under the table. The DP and DPD pizza tables use drawers, and worn drawer gaskets let warm air in. We replace what is worn and test the pull-down afterward.
Refrigerated Prep Table
Every maker we repair in this category, with general problems and care.
Open the categoryBeverage-Air prep tables lines we service
Current and older lines with their model numbers.
DP119HCDP46HCDP60HCDP67HCDP72HCDP93HCDPD119C-2DPD119C-3+22 more→Beverage-Air SPE and SPED Sandwich and Salad Prep TablesCurrent lineSPE27HCSPE32HCSPE36HCSPE48HCSPE60HCSPE60HC-32M-PTSPE72HCSPED27HC-2+9 more→Beverage-Air TPE Topping StationCurrent lineTPE27HC-6P-7R→Why are the toppings warm on my Beverage-Air prep table?
Check that the pans sit at the right height and the lid closes fully. If the rail stays warm, we test the air flow and cooling parts.
Do you repair Beverage-Air pizza prep tables with drawers?
Yes. We service DP and DPD tables, including drawer gaskets, the controller and the cooling system.
What causes water under a prep table?
A blocked drain line or a defrost cycle that cannot drain properly. We clear the line and check that defrost water leaves the cabinet.
Other Beverage-Air equipment we repair
Beverage-Air reach-in refrigerators11 series · 11 codes→
Beverage-Air reach-in freezers9 series→
Beverage-Air bar refrigeration5 series→Other prep tables makers we repair
Book Beverage-Air prep tables repair
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.