Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Refrigeration & ice · Miami, Los Angeles, Houston, New York and San Diego

Bar Refrigerator Repair in Miami, Los Angeles, Houston, New York and San Diego

Back-bar coolers, bottle coolers and keg refrigeration take a beating from busy shifts and spills. We repair bar refrigeration, quote it in writing, and service older units too.

6makers we repair
17model series listed
29error codes explained
30 daysworkmanship warranty
01Makers

Which bar refrigeration do you have?

Pick the maker on the data plate: each page lists its problems, codes and model series. Not on the list? Call us; we repair other makers too.

02What goes wrong

Common bar refrigeration problems we fix

In plain words, the way kitchen and laundry staff describe them when they call.

01

Bottles and beer not cold enough

02

Glass doors cloudy or dripping

03

Draft beer pouring foamy

04

Sticky residue clogging the condenser

05

Door sticking or hard to close

06

Unit loud or cycling constantly

Cooling behind and under the bar

Back-bar bottle coolers, undercounter beer and beverage coolers, glass froster chillers, kegerators and keg coolers all belong here. They sit in bars, restaurants, hotels, event venues and clubs, usually in tight spaces next to ice bins and soda guns.

Bar units wear in their own way. Spilled drinks and sugar glaze the condenser, moisture collects near the doors, and built-in openings limit airflow around the unit. Warm, humid nights in Miami and Houston, and packed weekends in New York, Los Angeles and San Diego, make each of these worse.

What we check, and what to know

We check the condenser and ventilation space, fans, door gaskets and hinges, the drain, the controller and the sealed system. For keg coolers we also look at the cooling unit, fan and door seal. A warm bottle does not say whether airflow or refrigerant is to blame, so we measure first.

On an older bar cooler, a gasket, fan or controller often costs far less than replacement. If the cabinet is rusted or the glass is cracked, we say so early. Please do not push a built-in unit back into a tight opening with its vents covered, and have the data plate ready when you call.

03Error codes

Bar refrigeration codes by maker

The same characters mean different things on different makers and controls, so pick yours first.

04Model series

Bar refrigeration lines we service

Current and older lines, with the model numbers in each.

FAQBar Refrigerator questions
Why is my back-bar cooler warm after a busy night?

Frequent door openings, a dirty condenser and a worn gasket are the usual reasons. Bar units also collect sugar and spills near the coil. We clean and check airflow first, then test the refrigeration.

Do you repair kegerators and keg coolers?

We repair the refrigeration side of keg coolers and walk-in keg rooms, including the cooling unit and controls. Draft line cleaning and gas supply are separate services, and we tell you which part of the problem is ours.

What details speed up the visit?

The model from the data plate, what you notice and when it began. Call us or fill out the online form, and we confirm a three-hour arrival window.

Book a visit

Book Bar Refrigerator Repair in Miami, Los Angeles, Houston, New York and San Diego

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit