Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Jackson · Dish machines

Jackson Conserver XL Chemical Door-Type Dishwashers

Current and older. 5 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • Conserver XL-E
  • Conserver XL-E-LTH
  • Conserver XL HH
  • Conserver XL2
  • Conserver XL

Repairs this series usually needs

  1. No wash because of the OFF-ON-FILL switch, wash relay or door switch
  2. Machine not filling or filling continuously
  3. Chemical sanitizer low
  4. Lime scale
  5. Leaks at the door or drain

The Conserver XL family covers chemical-sanitizing door-type machines: the XL-E, XL-E-LTH with its booster, the tall XL HH and the dual-rack XL2. Older Conserver machines share many parts. The data plate gives the model.

These use an electromechanical timer with top-mounted controls. When the pump does not run, we check the OFF-ON-FILL switch, the wash relay and the door switch. When it will not fill or keeps filling, we look at the fill solenoid and the drain ball seating. Low sanitizer is a canister, line or pump check.

Wear the gloves the chemical maker calls for, and never bypass the pump. These machines are common in smaller restaurants, and their simple controls make repairs straightforward. Tell us what the machine does and what the canister shows, and we come prepared.

About this series

  • Chemical-sanitizing door-type
  • XL-E at 39 racks per hour on 115 volts
  • XL HH has a 27 inch chamber
  • XL2 is a dual-rack model at 74 racks per hour
  • Electromechanical timer
FAQJackson Conserver XL Chemical Door-Type Dishwashers questions
How do I tell XL-E from XL2?

The XL2 is the dual-rack machine and the data plate says so. The XL-E is a single-rack door-type. We confirm parts by the model on the plate.

Why does the machine keep filling?

A fill solenoid that does not close or a drain ball that does not seat can do it. Shut the water off and call us.

Do you repair older Conserver machines?

Yes. Older Conserver XL units are still in service, and we repair them with a written price first. You get a written price first, and we say plainly if a repair is not worth it.

Book a visit

Book repair for your Jackson Conserver XL Chemical Door-Type Dishwashers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit