Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Jackson · Dish machines

Jackson RackStar 44 and 66 Rack Conveyor Dishwashers

Current line. 4 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • RackStar 44CE
  • RackStar 44CS
  • RackStar 66CE
  • RackStar 66CS

Repairs this series usually needs

  1. Rack jam or drive trouble
  2. Tank not heating
  3. Rinse temperature low
  4. Scale in nozzles
  5. Door or limit switches reading open

The RackStar is part of Jackson’s current rack conveyor range, in the 44 and 66 sizes. The data plate carries models such as RackStar 44CE, 44CS, 66CE and 66CS.

On a RackStar that stops or cleans poorly, we check the conveyor drive and the rack path first, then the tank heat and the final rinse. We look at the door and limit switches that stop the machine on their own, and at scale on the rinse nozzles, which water makes common.

Give us the full model at booking so parts are confirmed ahead of the visit. Cost is quoted before work, and our labor is guaranteed for 30 days. RackStar machines are current Jackson equipment, so parts are usually straightforward to confirm once we have the full model. Call us or use the online form for a three-hour arrival window, with the cost quoted beforehand.

About this series

  • Rack conveyor
  • Sizes 44 and 66
  • Models RackStar 44CE, 44CS, 66CE and 66CS
  • Part of Jackson's current conveyor range
FAQJackson RackStar 44 and 66 Rack Conveyor Dishwashers questions
Where is the RackStar model number?

It is on the data plate on the machine and reads like RackStar 66CE. Keep it handy for the call, which lets us confirm the right parts and quote the cost before the visit.

Why does my conveyor stop on its own?

A rack jam, a limit switch or an open door can stop the conveyor on its own. Clear a jam only with the machine switched off, and call us if it stops again.

Do you service the 44 and the 66?

Yes. We service both the 44 and the 66, in the CE and CS versions. Tell us which model is on your data plate when you call, and we confirm parts first.

Book a visit

Book repair for your Jackson RackStar 44 and 66 Rack Conveyor Dishwashers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit