UniMac UCH, UCZ and UCL Washer-Extractors, 20 to 100 lb
Current and older. 28 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- UCH020GNF
- UCH020GNV
- UCH030GNF
- UCH030GNV
- UCH040GNF
- UCH040GNV
- UCH060GNF
- UCH060GNV
- UCH080GNF
- UCH100GNF
- UCL020GN2
- UCL020GNF
- UCL020GNV
- UCL030GN2
- UCL030GNF
- UCL030GNV
- UCL040GN2
- UCL040GNF
- UCL040GNV
- UCL060GN2
- UCL060GNF
- UCL060GNV
- UCL080GNF
- UCL100GNF
- UCZ020GN2
- UCZ020GNF
- UCZ030GN2
- UCZ030GNF
Repairs this series usually needs
- Fill alarm when the programmed level is never reached
- Door lock error at the start or at the end
- Drain alarm with water left behind
- Drive error between Ed01 and Ed11
- Unbalance error that cuts the spin
UCH, UCZ and UCL are three of the UC prefixes in the CHM495R family, 28 numbers in this group such as UCH030GNF and UCL060GNF. The three digits after the letters give the capacity in pounds, from 20 to 100. The data plate carries the whole number.
We look at what the control reports. A fill alarm means it never reached the programmed level, so we check the supply, the valves and the level sensing. A drain alarm means the water stayed, so the pump and the drain valve come next. Drive errors are numbered Ed01 to Ed11, and those take us to the motor drive and its wiring.
We repair them, agree the cost in writing first, and give you a straight answer when a repair would be money wasted.
About this series
- Softmount and hardmount washer-extractors
- Front-end control with motor drive
- Prefixes UCH, UCZ and UCL
- CHM495R family, 20 to 100 lb
UniMac washers codes
Other UniMac washers series
What does the number in UCL060GNF tell me?
The three digits are the capacity in pounds, so it is a 60 lb washer-extractor. The letters and the end of the number tell us the control and the drive.
Why does my washer stop on a door lock error?
The door did not lock, or did not unlock, within the time allowed. We test the lock, the latch and the wiring, then the control input, since a worn latch is a common reason for this error.
Do you repair drive errors on these machines?
Yes. Drive errors on these washers run from Ed01 to Ed11. We test the motor, the wiring and the drive in order, and we replace only the part that the tests point to.
Book repair for your UniMac UCH, UCZ and UCL Washer-Extractors, 20 to 100 lb
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.