Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Henny Penny · Fryers

Henny Penny 320 Series Open Fryers

Current and older. 6 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • OFE-321
  • OFE-322
  • OFE-323
  • OFG-321
  • OFG-322
  • OFG-323

Repairs this series usually needs

  1. CPU too hot because side louvers are loaded with grease
  2. Fryer too hot or temp sensor messages
  3. High limit tripped
  4. Drain open message from the microswitch
  5. Heat amps messages on electric models

The 320 series is the workhorse open fryer from Henny Penny, and the numbers to look for are OFE-321, OFE-322 and OFE-323 for electric and OFG-321, OFG-322 and OFG-323 for gas. The family also includes OEA and OGA variants. Controls are Computron or iControl, depending on age.

Many calls on these fryers begin with a plain-language message on the display, such as CPU TOO HOT, FRYER TOO HOT or DRAIN IS OPEN. We read the message, then look at what causes it. Grease-packed louvers explain the first, a probe or heat control the second and the drain microswitch the third.

These fryers often outlast several controls. We repair older ones and tell you plainly when a repair is not worth it.

About this series

  • All-purpose open fryers
  • Electric OFE-321, 322 and 323, gas OFG-321, 322 and 323
  • Computron or iControl control
  • Common in many kitchens, with older units still working
FAQHenny Penny 320 Series Open Fryers questions
Which 320 series model do I have?

Look at the data plate for OFE or OFG and the three-digit number. The letter E means electric and G means gas. We use that to match parts.

What does CPU TOO HOT mean on a 320 series?

The PC board is overheating. Side louvers coated with grease are the first thing the maker points to, and wiping them is a good habit when the fryer is cool.

Is it worth fixing an old 320 series fryer?

Usually, when the vat is sound. We quote the repair in writing, weigh it against the age of the fryer and say so plainly if it is not worthwhile.

Book a visit

Book repair for your Henny Penny 320 Series Open Fryers

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit