Older Henny Penny Open Fryers
Older line. 8 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- OG-301
- OG-302
- OG-303
- OE-301
- OE-302
- OFE-141
- LVE-203
- 341
Repairs this series usually needs
- Pilot or ignition not lighting on gas models
- Thermostat or probe drift
- High limit tripping
- Drain valve leaking or sticking
- Slow recovery from tired elements or burners
Older Henny Penny open fryers still turn up in kitchens, labeled OG-301, OG-302 and OG-303 for gas, OE-301 and OE-302 for electric, and others such as the OFE-141, LVE-203 and 341. Their controls are simpler than the current iControl panels.
On these fryers we look first at the basics that wear with age: the pilot and ignition on gas models, the probe or thermostat, the high limit and the drain valve. Tired elements and burners show up as slow recovery, and a valve that no longer seals can leak oil onto the floor.
These are older lines, and we repair them. If the cost of a repair is more than the fryer is worth, we say so plainly, and the price is on paper before we begin.
About this series
- Older open fryers
- Gas OG-301, 302 and 303, electric OE-301 and 302
- Also OFE-141 and LVE-203
- Simpler controls than current fryers
Henny Penny fryers codes
Other Henny Penny fryers series
OFE-321OFE-322OFE-323OFG-321OFG-322OFG-323→Henny Penny 340 Series Wide-Surface Open FryersCurrent and olderOFE-341OFE-342OFG-341OFG-342→Henny Penny Evolution Elite Open FryersCurrent lineEEE 141EEE 142EEE 143EEE 144EEG 241EEG 242EEG 243EEG 244→Henny Penny High Volume 8-Head Pressure FryersCurrent and olderPFE-591PFG-691PFE 590PFG 690→Henny Penny High Volume OFE-291 and OFG-391 Open FryersCurrent lineOFE-291OFG-391→Henny Penny Velocity 500, 561 and 600 Pressure FryersCurrent linePFE 500PFG 600PFE 561→Older Henny Penny Pressure FryersOlder line561580590600690691PFE-592PFE-591+3 more→Are parts still available for an OG-301?
We confirm parts for your exact model before the visit. Older fryers sometimes need a substitute, and we tell you what fits and what it costs.
Why is my old open fryer slow to recover?
Worn elements, a tired burner or a drifting probe are the usual reasons. We test the heating side under load and price the repair in writing.
Should I replace an old open fryer or repair it?
If the vat is sound, repair often makes sense. If several big parts are failing, replacement may cost less over time. We lay out both honestly.
Book repair for your Older Henny Penny Open Fryers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.