UniMac UCN and UCU Washer-Extractors, 20 to 100 lb
Current and older. 27 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- UCN020GN2
- UCN020GNF
- UCN020GNV
- UCN030GN2
- UCN030GNF
- UCN030GNV
- UCN040GN2
- UCN040GNF
- UCN040GNV
- UCN060GN2
- UCN060GNF
- UCN060GNV
- UCN080GNF
- UCN100GNF
- UCU020GN2
- UCU020GNF
- UCU020GNV
- UCU030GN2
- UCU030GNF
- UCU030GNV
- UCU040GN2
- UCU040GNF
- UCU040GNV
- UCU060GN2
- UCU060GNF
- UCU060GNV
- UCU080GNF
Repairs this series usually needs
- Fill alarm that stops the cycle
- Door open error when a locked door is pulled
- Communication error between the controls
- Unbalance error on the extract
- Drive error on the motor control
The UCN and UCU numbers add up to 27 in this group, for instance UCN040GNF and UCU060GN2. They belong to the CHM495R family, with sizes from 20 to 100 pounds shown in the digits after the prefix.
A UC washer that stops with a communication error has lost contact between the master control and the motor control, and we start with the transformer connection and the wiring. A door open error that appears when someone pulls on a locked door tells us the door was forced, so we check the latch for damage. We check the sensing and the suspension on any unbalance error.
Many of these washers are older machines laundries, still earning their keep. We repair them, show the estimate on paper before work, and tell you honestly when you are better off replacing.
About this series
- Softmount and hardmount washer-extractors
- Front-end control with motor drive
- Prefixes UCN and UCU
- CHM495R family, 20 to 100 lb
UniMac washers codes
Other UniMac washers series
How do I know which UniMac washer-extractor I have?
Read the data plate. Numbers starting with UCN or UCU belong in this group, and the three digits after the prefix show the capacity in pounds.
What causes a door open error?
The control saw the door-open and door-locked inputs high at the same time, as when someone pulls on a locked door. We check the latch and the switches for damage and wear.
Can older UCN machines be repaired?
Usually, yes. We confirm parts for your model number first, and wear parts for this family are widely stocked. If a repair is not sensible for the age of the machine, you hear that before work begins.
Book repair for your UniMac UCN and UCU Washer-Extractors, 20 to 100 lb
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.