UniMac UC Washer-Extractors, 20 to 100 lb (QN Models)
Current and older. 43 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- UCA020QN
- UCA030QN
- UCA040QN
- UCA060QN
- UCA080QN
- UCA100QN
- UCD020QN
- UCD030QN
- UCD040QN
- UCG020QN
- UCG030QN
- UCG040QN
- UCG060QN
- UCG080QN
- UCG100QN
- UCH020QN
- UCH030QN
- UCH040QN
- UCH060QN
- UCH080QN
- UCH100QN
- UCJ030QN
- UCJ040QN
- UCJ060QN
- UCJ080QN
- UCJ100QN
- UCK030QN
- UCK040QN
- UCK060QN
- UCK080QN
- UCK100QN
- UCT020QN
- UCT030QN
- UCT040QN
- UCT060QN
- UCT080QN
- UCT100QN
- UCU020QN
- UCU030QN
- UCU040QN
- UCU060QN
- UCU080QN
- UCU100QN
Repairs this series usually needs
- Board ID error after a board is changed
- Input and output board that stops communicating
- Voltage setting error from the dip switch
- Drive board problem that stops the drum
- Door lock error
The 43 numbers in this group begin UCA, UCD, UCG, UCH, UCJ, UCK, UCT or UCU and end in QN, as in UCA020QN and UCK100QN. The digits tell you the washer capacity in pounds, from 20 to 100.
This family uses a front-end control, an input and output board and a drive board, and it checks that each board matches the machine. A wrong board shows up as an ID error. A dip switch set to the wrong voltage has its own message, and an input and output board that is not communicating has another. We read the message, then match the board to the model number before replacing it.
Washer-extractors this size work hard in hotels, laundries and care homes, and older ones are common. We repair them, quote in writing first, and give a candid opinion when it is time to replace.
About this series
- Size range 20 to 100 lb
- Front-end control with an I/O board and a drive board
- Numbers like UCA020QN, capacity in pounds in the middle
- CHM1792C family
UniMac washers codes
Other UniMac washers series
UCH020GNFUCH020GNVUCH030GNFUCH030GNVUCH040GNFUCH040GNVUCH060GNFUCH060GNV+20 more→UniMac UCN and UCU Washer-Extractors, 20 to 100 lbCurrent and olderUCN020GN2UCN020GNFUCN020GNVUCN030GN2UCN030GNFUCN030GNVUCN040GN2UCN040GNF+19 more→What does QN at the end of the number mean?
It marks the QN version of this family, which uses the front-end control with separate input and output and drive boards. The full number on the data plate tells us the exact parts.
What happens after a board is replaced?
The control checks the board against the machine setup, and a wrong one shows as an ID error. That is why we match each board to the model number before fitting it.
Do you repair the 100 lb UC washers?
Yes. We service the whole size range in this group, up to the 100 lb machines. Big washer-extractors load the drive and the mount hard, so those parts get a close look during every repair.
Book repair for your UniMac UC Washer-Extractors, 20 to 100 lb (QN Models)
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.