Speed Queen Metered Top-Load Washers, SWT1 Series
Older line. 36 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- SWT110*A
- SWT110*M
- SWT110*N
- SWT111*A
- SWT111*A1200
- SWT111*A1300
- SWT111*A3000
- SWT111*A3022
- SWT111*A3028
- SWT111*A3050
- SWT111*A5412
- SWT111*B3069
- SWT111*M
- SWT111*M1200
- SWT111*M1300
- SWT111*M3000
- SWT111*M3022
- SWT111*M3050
- SWT111*M3069
- SWT111*M5412
- SWT111*N
- SWT111*N3000
- SWT111*N3022
- SWT111*N3028
- SWT111*N3050
- SWT111*N3069
- SWT111*N5412
- SWT111*N5417
- SWT120*A
- SWT120*M
- SWT120*N
- SWT121*A
- SWT121*A3000
- SWT121*M
- SWT121*M3000
- SWT121*N
Repairs this series usually needs
- Coin drop that rejects coins or gives no cycle
- Fill error on a slow water supply
- Drain error at the end of a wash step
- Break-in alarm after a switch is disturbed
- Motor that hums with no agitation
The SWT1 numbers are the biggest single block of older Speed Queen top-loaders, 36 in all. Typical entries are SWT111*A3000 and SWT121*M3000. Check the data plate, because the letters and digits after the star tell us which version of the washer you have.
On these machines we begin at the money. A coin drop that rejects coins, or a card reader that has lost contact, is the most common call, and it is a simple matter of testing the coin parts and wiring. After that we go through the fill valves and screens, then the pump and hose when a washer will not finish draining.
Many SWT1 washers have been in service for decades coin shops and apartment buildings. Call us or use the online form, and we will confirm a three-hour arrival window. A machine that is past saving gets a candid answer, not a repair bill.
About this series
- Metered and non-metered top-load washers
- Coin-slide or coin-drop operation
- Timer, EDC, MDC or NetMaster controls
- Numbers begin SWT11 or SWT12
Speed Queen coin & card laundry codes
Other Speed Queen coin & card laundry series
SWT210*ASWT210*A1124SWT210*MSWT210*M1124SWT210*NSWT210*N1124SWT211*A1200SWT211*A1300+28 more→Speed Queen SWL, SWN and SWT0 Metered Top-Load WashersOlder lineSWL520*NSWL521*NSWLB20*NSWLB21*NSWLF20*NSWLF21*NSWLT20*NSWLT21*N+26 more→Speed Queen SWT4 through SWT9 Metered Top-Load WashersOlder lineSWT420*ASWT420*DSWT420*MSWT421*ASWT421*A3000SWT421*A3022SWT421*A3028SWT421*A3050+46 more→Speed Queen SWTA through SWTZ Lettered Top-Load WashersOlder lineSWTA21*MSWTA21*M3022SWTA21*M3050SWTA21*NSWTA21*N3050SWTB20*MSWTB20*NSWTB21*M+48 more→Why does my coin washer reject good coins?
The coin drop or its sensing may be dirty or worn. We test the coin parts and the wiring, then the control, before replacing anything.
What does a drain error on an older top-load washer mean?
The control sensed too much water, or water at the wrong moment, in a spin step. We check the pump, the hose and the standpipe height, because a standpipe set too high can leave water in the tub.
Can you fix an SWT1 washer with a NetMaster control?
Yes, we service the timer, EDC, MDC and NetMaster versions. Bring the model number from the data plate and we confirm the parts before we visit.
Book repair for your Speed Queen Metered Top-Load Washers, SWT1 Series
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.