Hobart Meat Grinder Repair
We repair Hobart meat grinders, bowl choppers and mixer-grinders in Miami, Los Angeles, Houston, New York and San Diego, including the 4146, 4732, 4812, 4822 and the MG1532 and MG2032. We quote the price in writing before any work starts.
Common Hobart grinders problems
In plain words, the way kitchen and laundry staff describe them when they call.
Grinder will not start
Meat comes out smeared
Overload trips under heavy load
Gear or bearing noise
Leak at the seal
Hobart’s grinder line includes the 4146, 4732, 4732A, 4812 and 4822 grinders and choppers, and the mixer-grinders, which combine a mixing bowl and a grinder in one machine. We service the MG1532, MG2032 and 4246, and older Hobart grinders that have been in meat rooms for years.
When a grinder will not start, the first thing we check is whether the head and pan are seated so the interlock closes. Then we move to the switch, the starter and the overload. If the overload trips under a heavy load, we look at the knife and plate condition and how cold and tough the product is, because a dull knife makes the motor work much harder.
Smeared meat is nearly always a dull knife or a plate that is no longer flat. Gear or bearing noise and seal leaks are signs of wear that get worse with daily washdowns, and we say plainly when an older unit is not worth the cost of a repair. Our work carries a 30-day warranty.
Meat Grinder
Every maker we repair in this category, with general problems and care.
Open the categoryHobart grinders lines we service
Current and older lines with their model numbers.
Why does my Hobart grinder smear the meat?
A dull knife or a plate that is no longer flat is the usual cause. We check both, along with how tightly the ring is set, and tell you the written price before replacing anything.
Do you repair Hobart mixer-grinders?
Yes. We service the MG1532, MG2032 and 4246 mixer-grinders. We check the mixing drive and the grinding drive separately so you only pay for what is needed.
My grinder will not start. Is it the motor?
Often it is not. The head or pan may not be seated, which keeps the interlock open. We test the interlock, the switch, the starter and the overload before looking at the motor.
Other Hobart equipment we repair
Hobart dish machines4 series · 15 codes→
Hobart glasswashersService and repair→
Hobart conveyor dish machines1 series→
Hobart pot & pan washers1 series→
Hobart booster heatersService and repair→
Hobart mixers6 series · 11 codes→
Hobart slicers3 series→
Hobart food processors3 series→Other grinders makers we repair
Book Hobart grinders repair
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.