Groen SmartSteam Pro Boilerless Steamers
Current line. 26 model numbers in this series.
Model numbers in this series
Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.
- GSSP-BL-3E
- GSSP-BL-3ES
- GSSP-BL-3G
- GSSP-BL-3GS
- GSSP-BL-5E
- GSSP-BL-5ES
- GSSP-BL-5G
- GSSP-BL-5GS
- GSSP-BL-10ES
- GSSP-BL-10GS
- GSSP-BLE-3E
- GSSP-BLE-3ES
- GSSP-BLE-5E
- GSSP-BLE-5ES
- GSSP-CL-3E
- GSSP-CL-3ES
- GSSP-CL-5E
- GSSP-CL-5ES
- 2GSSP-BL-3ES
- 2GSSP-BL-5ES
- 2GSSP-BL-10ES
- 2GSSP-BL-3GS
- 2GSSP-BL-5GS
- 2GSSP-BL-10GS
- 2GSSP-BLE-3ES
- 2GSSP-BLE-5ES
Repairs this series usually needs
- Touchscreen showing a warning
- Cabinet slow to reach temperature
- Fill or drain problems
- Door switch or latch problems
- Delime reminder that will not clear
SmartSteam Pro is the touchscreen steamer in the Groen line. Models read like GSSP-BL-5E, GSSP-BLE-3ES or GSSP-CL-5ES, and a leading 2 means two cabinets stacked. Some are connected to water and some are connectionless.
The screen can store error codes for five days, which helps us when a problem comes and goes. Tell us what the screen showed and when. We then check the water fill and drain, the door switch, the heat source (electric or gas) and the delime status. Delime reminders are not decoration here, because scale shortens the life of these units.
Gas versions get an ignition and burner test, and a gas odor means walking out and phoning the gas company. Older units with a few years of use often need the same fill and door checks before anything else.
About this series
- Boilerless and connectionless steamer
- 4.3-inch touchscreen
- Door-open alert
- Programmable delime schedule
- Stores error codes for 5 days
Groen steamers & kettles codes
Other Groen steamers & kettles series
DEE-4TDHT-40DHT-60D-40 INA/2D-60 INA/2D-80 INA/2→Groen Floor-Standing Steam-Jacketed KettlesCurrent and olderAH/1EAHS-40DHDHS-40DEE/4DEE-20 MarineDEES-40EE+7 more→Groen HyPerSteam Generator SteamersCurrent lineHY-3EHY-3EFHY-5EHY-5EFHY-5GHY-6EHY-6G2HY-3E/EF+2 more→Groen HyPlus Boiler-Based Pressureless SteamersCurrent lineHY-6SGHY-6SEHY-6SMHY-10SGHY-10SEHY-10SMHY-6SG-36HY-6SE-36+4 more→Groen Intek XS Connectionless Table-Top SteamerCurrent lineIntek XS→Groen Table-Top Tilting Steam-Jacketed KettlesCurrent and olderTDBTDB MarineTDB/6-10TDBCTDBC-40 MarineTDHTDHCTDA/1+6 more→Older Groen HyPerSteam HY-5G, HY-6E and HY-6G SteamersOlder lineHY-5GHY-6EHY-6G→Older Groen SmartSteam 100 SSB-5G Gas SteamerOlder lineSSB-5G→What does the touchscreen tell a technician?
It keeps error codes for five days, so we can see what happened even if the problem has cleared. Write down what you saw and when.
Is a connectionless SmartSteam different to service?
The water arrives by hand-fill rather than a line, but the checks are similar: fill, heat, door and delime. We confirm which kind you have from the plate.
Why does the delime alert keep coming back?
Scale remains until the delime is completed properly. If it still returns afterward, we check the sensors and settings. The price is put in writing before we begin.
Book repair for your Groen SmartSteam Pro Boilerless Steamers
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.