Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Cooking · Miami, Los Angeles, Houston, New York and San Diego

Commercial Griddle Repair in Miami, Los Angeles, Houston, New York and San Diego

Griddles and flat tops must heat evenly to cook consistently. We repair gas and electric griddles and charbroilers, find the cause of cold spots, and quote in writing before we start.

6makers we repair
12model series listed
0error codes explained
30 daysworkmanship warranty
01Makers

Which griddles do you have?

Pick the maker on the data plate: each page lists its problems, codes and model series. Not on the list? Call us; we repair other makers too.

02What goes wrong

Common griddles problems we fix

In plain words, the way kitchen and laundry staff describe them when they call.

01

Cold spots across the plate

02

Burner not lighting on one section

03

Thermostat not controlling heat

04

Grease trough leaking or clogged

05

Plate warped or cracked

06

Pilot going out repeatedly

Plates, burners and controls

Flat-top griddles in countertop and floor models, plancha-style surfaces and charbroilers fall in this category. They sit at the center of breakfast lines, diners, cafeterias, food courts and burger kitchens, and heat with gas burners or electric elements under a steel or chrome plate.

Griddles age through heat and grease. Burner ports clog, thermostat knobs and valves wear, and plates can warp when cooled with water. Grease works its way into pilot areas and wiring, and humid coastal air speeds rust under the plate and in the trough.

Our first checks

We examine each burner or element zone, the ignition or pilot, the gas valve and thermostat for that zone, the plate surface and the grease path. A cold section does not say by itself whether fuel, ignition or the control is to blame, so we test them one by one.

On an older griddle, thermostats and valves are routine repairs, while a badly warped plate means replacement, and we say so plainly. Please do not shock a hot plate with cold water. If you smell gas, leave the building and call the gas utility from outside. Keep the data plate details ready.

FAQCommercial Griddle questions
Why does my griddle have cold spots?

Cold spots usually come from a clogged or weak burner, a failing thermostat on that zone, a warped plate, or heavy residue from cooking. We check each zone separately and give you what we found and the repair price in writing.

Do you repair charbroilers as well as griddles?

Yes. We service gas and electric griddles, flat tops and charbroilers. Tell us which you have and read the model off the data plate, so we bring the right burners, valves and thermostats.

Should I replace an older griddle or repair it?

Many older griddles repair well if the plate is flat and the frame is sound. After the check we tell you what is practical, and you see the written price before we begin.

Book a visit

Book Commercial Griddle Repair in Miami, Los Angeles, Houston, New York and San Diego

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit