Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Speed Queen · Washers

Speed Queen SCB, SCD, SCH, SCL and SCZ Washer-Extractors

Current and older. 38 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • SCB040GNF
  • SCD030GD2
  • SCD040GD2
  • SCD060GD2
  • SCH030GCF
  • SCH030GNF
  • SCH030GNV
  • SCH040GCF
  • SCH040GNF
  • SCH040GNV
  • SCH060GNF
  • SCH060GNV
  • SCH080GNF
  • SCH100GNF
  • SCL020GC2
  • SCL020GN2
  • SCL020GNF
  • SCL020GNV
  • SCL030GC2
  • SCL030GCF
  • SCL030GN2
  • SCL030GNF
  • SCL030GNV
  • SCL040GC2
  • SCL040GCF
  • SCL040GN2
  • SCL040GNF
  • SCL040GNV
  • SCL060GC2
  • SCL060GN2
  • SCL060GNF
  • SCL060GNV
  • SCL080GNF
  • SCL100GNF
  • SCZ020GN2
  • SCZ020GNF
  • SCZ030GN2
  • SCZ030GNF

Repairs this series usually needs

  1. Fill error when the programmed level is not reached
  2. Door lock error at start or at the end of a cycle
  3. Unbalance error on spin
  4. Drain alarm with water left in the machine
  5. Drive error between Ed01 and Ed11

SCB, SCD, SCH, SCL and SCZ are five prefixes in the CHM495R family of washer-extractors, 38 model numbers in all. SCH030GNF and SCL040GC2 are samples. The three digits after the letters give the capacity in pounds, from 20 up to 100.

The front-end control watches the fill, the door, the drain and the load balance, and it gives an error when any step runs out of time. A fill error means the water level was not reached, and a drain alarm means it was not emptied. We check the supply and the drain path first, then the sensing, then the control. Drive errors lead to the motor drive and its wiring.

We repair these machines laundries and apartment buildings, including older ones. The cost is spelled out on paper before we start, and a repair that makes no sense gets a candid answer.

About this series

  • Washer-extractors from 20 to 100 lb
  • Front-end control with motor drive
  • Prefixes SCB, SCD, SCH, SCL and SCZ
  • CHM495R family
→Same maker

Other Speed Queen washers series

Speed Queen Quantum Top-Load Washers: SWNNX and SWNNZCurrent and olderSWNNX2AP113TW02SWNNX2AP113TW15SWNNX2HP113CW15SWNNX2HP113TW01SWNNX2HP113TW02SWNNX2HP113TW04SWNNX2HP113TW15SWNNX2HP115CW02+22 moreSpeed Queen SCA, SCG and SCT Washer-Extractors, 20 to 100 lbCurrent and olderSCA020QNSCA030QNSCA040QNSCA060QNSCA080QNSCA100QNSCG020QNSCG030QN+10 moreSpeed Queen SCN Washer-Extractors, 20 to 100 lbCurrent and olderSCN020GC2SCN020GD2SCN020GE2SCN020GN2SCN020GNFSCN020GX2SCN020GY2SCN030GC2+31 moreSpeed Queen SCU Washer-Extractors, 20 to 80 lbCurrent and olderSCU020GC2SCU020GD2SCU020GE2SCU020GL2SCU020GN2SCU020GNFSCU020GNVSCU020GX2+35 moreSpeed Queen SFNL Quantum Front-Load WashersCurrent and olderSFNLCFJP111TW01SFNLCFSG111TN01SFNLCFSG111TQ01SFNLCFSG111TW01SFNLCFSG111TWNASFNLCFSP111TN01SFNLCFSP111TQ01SFNLCFSP111TW01+23 moreSpeed Queen SFNN and SFNW Quantum Front-Load WashersCurrent and olderSFNNCFJP112TW01SFNNCFSG111TN01SFNNCFSG112TN01SFNNCFSG112TQ01SFNNCFSG112TW01SFNNCFSP111TN01SFNNCFSP111TW01SFNNCFSP112TN01+32 moreSpeed Queen Stacked Washer-Dryers, STEB and STGBOlder lineSTEBCFSP172TQ01STEBCFSP172TW01STEBXFSP132DW01STEBXFSP172TQ01STEBXFSP172TW01STEBXFSP301NW22STEBXFSP302NW01STEBXFSP302NW22+14 moreSpeed Queen SWNNC and SWNNE Quantum Top-Load WashersCurrent and olderSWNNC2AP113TW01SWNNC2AP113TW02SWNNC2AP113TW04SWNNC2AP113TW15SWNNC2HP113TQ01SWNNC2HP113TQ04SWNNC2HP113TW01SWNNC2HP113TW02+20 moreSpeed Queen SWNNY, SWNR and SWNW Top-Load WashersCurrent and olderSWNNY2AP113TW01SWNNY2AP113TW04SWNNY2HP113CW04SWNNY2HP113TW01SWNNY2HP113TW04SWNNY2HP115CW01SWNNY2HP115TW01SWNNY2HP116TW01+24 more
FAQSpeed Queen SCB, SCD, SCH, SCL and SCZ Washer-Extractors questions
What does the number after the letters mean on an SCL040 washer?

The three digits are the capacity in pounds, so SCL040 is a 40 lb washer. The full number on the data plate also tells us the control and drive version.

My washer-extractor stops on a drain alarm. Why?

The water level was not reached in the drain step within the allowed time. We check the pump, the drain valve and the plumbing, then the level sensing.

Can you repair an unbalance error?

Yes. We check how the load sits, the suspension and the sensing, then the drive. Loading evenly is the first thing to try, and we find the cause if it keeps happening.

Book a visit

Book repair for your Speed Queen SCB, SCD, SCH, SCL and SCZ Washer-Extractors

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit