Ultrafryer Commercial Fryer Repair
We repair Ultrafryer UltraGold and UltraPro gas fryers and fryer batteries, including older UltraStat-controlled models, in Miami, Los Angeles, Houston, New York and San Diego. We find the cause, write the price down, and then start the repair.
Common Ultrafryer problems we fix
In plain words, the way kitchen and laundry staff describe them when they call.
Ignition lockout
No spark and no blower
Puffing sound at start-up
Oil too hot or not hot enough
High limit shuts the system down
Heat problems that come and go
Ultrafryer Models in Our Service List
Ultrafryer builds gas fryers in tube and infrared styles, mostly as batteries of two to six vats. The UltraGold P30 line in 14 and 18 inch widths uses the PAR-3 heat exchanger with UltraClear Plus filtration and UltraStat 23 controls. The P20 batteries, the 65 lb Right Size two-vat infrared fryers, the Jumbo, the UltraPro14 infrared premix fryers and the UG and UE series complete the current range. Older UltraStat 25 and 402 units and early PAR-3 fryers still cook in restaurants across our five metros, and we repair those as well.
Ignition, Probes and Heat Control
We diagnose these fryers by how they behave and by testing, not by looking up a numbered code. An ignition lockout takes us through the gas valve, electrode and ignition module. No spark and no blower sends us to the probe leads, an open probe and the controller. Puffing at start-up usually means wrong gas pressure or a cracked electrode. Too much heat can come from the probe, an offset setting, gas pressure, or a set temperature above 400 degrees F.
The high limit shuts the system down when oil is below the minimum fill line, so we check the oil level before blaming a part. Problems that come and go can trace to loose wiring or a hot room, and a busy fry station provides both. You get a written price before work, an honest word on whether an older battery should be replaced, and a 30-day warranty on the repair.
Ultrafryer codes and alarms
What the display or the blinking light means, what is safe to check, and when to stop and call us.
Ultrafryer lines and model numbers we service
Current and older lines. Find the number on the data plate and open its series for the usual repairs.
F-IRC-14F-IRD-14PD14B-IR-18B-IR-20F-P25-14F-P30-14F-P30-18+5 more→Ultrafryer UG and UE Series Gas and Electric FryersCurrent lineUG14UG18UG20UE18UE20→Ultrafryer UltraGold Jumbo Gas FryerCurrent lineF-ID-20x17→Ultrafryer UltraGold P20-18 and P20-20 Gas FryersCurrent lineB-P20-18-2-UCPB-P20-18-3-UCPB-P20-18-4-UCPB-P20-18-5-UCPB-P20-18-6-UCPB-P20-18-3-UCB-P20-18-4-UCB-P20-18-5-UC+11 more→Ultrafryer UltraGold P30-14 and P30-18 Gas FryersCurrent lineB-P30-14-2-UCPB-P30-14-3-UCPB-P30-14-4-UCPB-P30-14-5-UCPB-P30-14-6-UCPB-P30-18-2-UCPB-P30-18-3-UCPB-P30-18-4-UCP+8 more→Ultrafryer UltraGold Right Size 65 lb Infrared FryersCurrent lineB-IR-RS-2-UCPB-IR-RS-3-UCPB-IR-RS-4-UCPB-IR-RS-3-UCB-IR-RS-4-UC→Ultrafryer UltraPro14 Infrared Premix Gas FryersCurrent lineB-IRS-14F-IRS-14B-IRC-14-B→Do you service older Ultrafryer models with UltraStat controls?
Yes. We repair older UltraStat 25 and 402 fryers as well as current UltraStat 23 models. We confirm the model first so the right parts come with us, and we say when a repair is not worth it.
Why does my Ultrafryer make a puffing sound when it starts?
Puffing at start-up usually means wrong gas pressure or a cracked electrode. If you ever smell gas, get everyone out and call the gas utility from outside. Otherwise call us and we will test both.
Why does my Ultrafryer shut down on high limit?
Low oil is a common reason, so check that the oil is at or above the minimum fill line. If the level is right, the probe or controller may need replacing, and we test both.
Other makers we repair in these categories
Book Ultrafryer repair in Miami, Los Angeles, Houston, New York and San Diego
Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.