Booking today · Miami, Los Angeles, Houston, New York and San Diego · three-hour arrival windows Independent commercial equipment repair · Every maker on this site Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(844) 393-0816 Schedule a Visit
Model series · Beverage-Air · Reach-in refrigerators

Beverage-Air Horizon HR Top-Mount Refrigerators

Current line. 14 model numbers in this series.

01Model numbers

Model numbers in this series

Find yours on the data plate. Letters after the base number usually mark the voltage, finish or door and do not change the repair.

  • HR1HC-1-HG
  • HR1HC-1G
  • HR1HC-1HS
  • HR1HC-1S
  • HR1WHC-1G
  • HR1WHC-1S
  • HR2HC-1G
  • HR2HC-1HG
  • HR2HC-1HS
  • HR2HC-1S
  • HR3HC-1G
  • HR3HC-1HG
  • HR3HC-1HS
  • HR3HC-1S

Repairs this series usually needs

  1. Hi or AH1 alarm after a restock
  2. Door gasket wear
  3. Dirty condenser on the top unit
  4. E01 to E04 or E1 to E4 sensor codes
  5. Frost on the evaporator

The Horizon HR is a Beverage-Air top-mount reach-in, meaning the compressor and condenser sit above the food compartment. The plate number starts with HR and a section count, as in HR1HC-1G, HR1HC-1HG or HR1HC-1HS, and the letters at the end describe door style. Fourteen numbers are in the line.

A top-mount unit pulls room air through the condenser at the top of the cabinet, so lint and kitchen grease collect where you cannot see them. We start there, then check the door seals and the fans. The display tells us which controller you have: Danfoss cabinets show Hi, Lo and dOr, and Eliwell cabinets show AH1, AL1 and OPd.

Current cabinets use R290, a flammable refrigerant, so sealed-system work stays with us.

About this series

  • Top-mount reach-in refrigerators, one to three sections
  • Danfoss or Eliwell electronic controller, depending on the build
  • Hydrocarbon R290 refrigerant on current cabinets
  • Models such as HR1HC-1G and HR1HC-1HS
FAQBeverage-Air Horizon HR Top-Mount Refrigerators questions
Why does my HR show Hi after every delivery?

A restock puts warm product into the box and the doors stay open longer, so the air temperature climbs. If Hi clears as the cabinet recovers, the load was the reason. If it stays, the condenser or the seals need a look.

How do I know which controller my HR has?

Read the wording on the display. Hi, Lo and dOr belong to the Danfoss control, while AH1, AL1 and OPd belong to the Eliwell control. Tell us which you see and we plan the visit.

Is it safe for me to clean the top condenser?

Switching the cabinet off and brushing dust from the fins is fine for most owners. Leave panels, wiring and refrigerant parts to us, since the cabinet uses a flammable refrigerant.

Book a visit

Book repair for your Beverage-Air Horizon HR Top-Mount Refrigerators

Tell us the maker, the model number from the data plate and what the unit is doing. We confirm a three-hour arrival window and give you a written price before any work starts.

☎ Call our office ▤ Schedule a Visit